existence of a new software every time the STB goes to standby. The second one is
waking up at 04:00 a.m. every night, provided that the STB is left in standby mode. Both
automatic upgrade methods result in standby mode either upgraded or not. If the
automatic upgrade is set to 'Disable' then this function will not work.
Manual upgrade starts if the 'Search for New Version' button is pressed.
After pressing the 'Search for New Version' button, the STB tunes to each frequency
that have been stored in its database and looks for the new software. Since this process
takes some time, a warning message is displayed.
Depending on the existence of a new software, two different messages can appear on
the screen: 'No new software found. Press SELECT to exit.' or 'New software found!