Table of Contents
Advertisement
2. DVB
FIRST TIME INSTALLATION
In Installation menu first time installation sub-menu exists. If you choose YES by
pressing SELECT button on the remote control, EEPROM and database is erased.
SOFTWARE DOWNLOAD FROM COM PORT
RS232 TEST
The list of the necessary equipment is as follows:
PC with "Hyper Terminal" function,
RS232 serial communication cable
RS232 software download kit
Steps to be followed by the user are given below:
1. Connect the serial communication cable between the TVSCART of the receiver and
the serial communication port (COM1 or COM2) of the PC.
2. Make sure that the PC is on and the receiver is powered off.
3. Run "Hyper Terminal" program of the PC from Start / Programs / Accessories /
Communications / Hyper Terminal menu.
4. For a new connection, run Hypertrm.exe file.
5. Give a name and choose an icon for the connection. (You do not need to make a
new connection every time. You can use this name for the future connections.)
6. Choose communication port in the new coming window (COM1 or COM2)
whichever you have used in Step 1.
7. Port settings should be as follows:
Bits per second: 38400
Data Bits
Parity
Stop bits
Flow control
8. Now Hyper Terminal connection is established. When you power on the stb you
will see that stb is going to stby state .Then you can activate the stb by remote control and
see every result of command from the remote control
: 8
: None
: 1
: Hardware
Advertisement
Table of Contents
