Husqvarna AUTOMOWER 440 Operator's Manual page 34

ECO mode the robotic lawnmower otherwise can not be
started inside the working area.
3.18.3 Spiral cutting
If the robotic lawnmower enters an area where it senses
the grass is longer than average, it can change the
movement pattern. It can then mow in a spiral pattern to
faster cut the area of longer grass.
Use Spiral cutting
Intensity
Spiral cutting is activated by default, uncheck the box to
deactivate.
The level of intensity can be adjusted to set how much
over the average height the grass has to be for spiral
Low- / Low sensitivity means that spiral
cutting to begin.
cutting begins less often.
that spiral cutting begins more often.
In order to minimize the risk for lawn wear in steep
slopes, spiral cutting does not start in slopes steeper
than 15%.
3.18.4 Slope control
In order to reduce lawn wear near boundary wire in
slopes, the robotic lawnmower avoids reversing when
driving downhill. When approaching the boundary wire it
therefore either bounces away or makes a U-turn. Slope
control is activated by default. Uncheck the box to
deactivate.
3.18.5 General
Set language and time or reset user settings to factory
default.
34 - Installation
Low-
Low
Mid
High High
High+
High / High+ sensitivity means
General Time & date
Language
Country
Reset all user settings
About
3.18.5.1 Time & Date
This function allows you to set current time and date and
required formats.
Time & Date
Set time: Enter the correct time and press OK to
•
exit.
Set date: Enter correct date and press OK to exit.
•
Time format: Place the cursor at the required time
•
format: 12h 24h. Press OK to exit.
Date format: Place the cursor at the required date
•
format:
YYYY-MM-DD (year-month-day)
MM-DD-YYYY (month-day-year)
DD-MM-YYYY (day-month-year)
Exit by pressing OK.
3.18.5.2 Language
Set language with this function.
To select language: Place the cursor at the required
language and press OK.
3.18.5.3 Country
With this function you can select in what country the
robotic lawnmower will work.
Place the cursor at the required country and press OK.
3.18.5.4 Reset all user settings
This function allows you to reset the robotic lawnmower
to the factory default settings.
The following settings are however not altered:
• Security level
• PIN code
• Loop signal
• Messages
• Date & Time
• Language
• Country
Reset all user settings in the menu and press
1. Select
OK.
Set time
Set date
Time format
Date format
447 - 001 -