Advertisement
Table of Contents
Hercules
10ft 8in Wide x 20ft Deep x 6ft 8in Side / 9ft 6in Center Height
With 8 Legs, King Truss™ Roof Cable System, Cover, and 4 Piece-
Side-Wall kit.
Distributed by:
PIC America, LTD.
1730 Five Points Lane • Fuquay-Varina, NC 27526
1-800-800-6296 • www.kingcanopy.com
Enclosed Snow Load
™
10ft X 20ft
King Canopy Item #: HC1020PCSL
WARNING:
Keep all flame and heat sources
away from this tent fabric. Meets
the flammability requirements of
CPAI-84 . It is not fire proof. The fabric
will burn if left in continuous contact
with any flame source.
Advertisement
Table of Contents
Related Manuals for KING CANOPY Hercules HC1020PCSL
Summary of Contents for KING CANOPY Hercules HC1020PCSL
- Page 1 Enclosed Snow Load ™ 10ft X 20ft 10ft 8in Wide x 20ft Deep x 6ft 8in Side / 9ft 6in Center Height King Canopy Item #: HC1020PCSL With 8 Legs, King Truss™ Roof Cable System, Cover, and 4 Piece- Side-Wall kit. WARNING: Keep all flame and heat sources away from this tent fabric.
-
Page 2: Parts List
PARTS LIST 6X6-2PC 8 pc 77.5in pipes, 2in diameter 6x6-15PC 9 pc 77.5in pipes, 1-1/2in diameter 5X8-2PC 8 pc 67.5in pipes, 2in diameter 3W215PC 6 pc 3-way connectors 4W215PC 6 pc 4-way connectors BALLW 75 pc Elastic ball straps FOOT2PC 8 pc Foot pads PTCL1020FR6... -
Page 3: Frame Assembly
FRAME ASSEMBLY Step 1 Separate all pieces according to size and shape and arrange per the illustration shown below. Please note: • The 67.5in, 2 in diameter pipes are used to form the roof rafters • The 77.5in, 1-1/2 in diameter pipes are used to form the roof perimeter •... -
Page 4: Cover Assembly
COVER ASSEMBLY Step 1 Unfold the cover with the grommets toward the cover’s bottom and place over the frame. The flared edges should be located at each of the 4 corners of the frame. Step 2 Begin attaching the cover with the elastic ball straps by inserting the elastic cord of the ball strap underneath the cover and through the grommet. - Page 5 WALLS AND LEGS ASSEMBLY Step 1 Unfold each of the walls. • The front wall features 3 zippers, one on each side and one in the center. • The rear wall is solid woth no zippers. • The side walls of the unit feature 3 windows each Step 2 Find the hook &...
- Page 6 ANCHORING YOUR UNIT This canopy is designed for use as a temporary structure. After assembly, the canopy MUST BE securely anchored to the ground to prevent damage from winds. Your canopy will act like a kite in the wind if not properly and securely anchored to the ground.
- Page 7 INSTALLING THE LEG SKIRTS Step 1 After the legs have been connected to the roof using the 3- and 4-way connectors and your canopy has been securely anchored, attach the leg skirts using elastic ball straps and the grommets at the top of the unit. (Make sure that the end walls are underneath the flared leg covers to minimize rain and other elements from entering inside the canopy unit.) Step 2...
- Page 8 IMPORTANT NOTICE: PLEASE READ CAREFULLY We are confident that you will be completely satisfied with your King Canopy unit. Please take a moment to read the very important information below, and call us with any questions you may have. King Canopy/PIC America, LTD. has no control over wind, snow, ice, rain or any other weather condition and we are in no way responsible for any damage caused by the canopy or to the canopy.
-
Page 9: Product Information
Improper Anchoring, Strong Winds, Rain Snow, or Ice King Canopy/PIC America, LTD. does not guarantee these canopies under strong weather conditions. These canopies are designed to protect against damages caused by sun, rain, tree sap, birds, etc. They are not designed to hold roof loads that accompany snow, ice or heavy rains.
Need help?
Do you have a question about the Hercules HC1020PCSL and is the answer not in the manual?
Questions and answers