Positioning - Magnat Audio MONITOR SUB 200A Owner's Manual

GB
Dear Customer,
Congratulations on your fine new loudspeakers and thank you very much for
choosing MAGNAT! You have made an excellent choice. The high-quality speakers
produced by MAGNAT are renowned all over the world.
Please study the instructions and information below carefully before using your new
loudspeakers.
THE MAGNAT MONITOR SUB 200A AND SUB 300A ACTIVE SUBWOOFERS
These subwoofers have been adapted to provide the best visual and acoustic match
to the MAGNAT Monitor range of loudspeakers. However, it goes without saying that
they may be combined with other loudspeakers.
When connecting your loudspeaker, please make sure that everything has been
switched off. Furthermore, make sure that all loudspeaker cables are connected to
the proper poles, i.e. the positive pole for the output is connected to the positive pole
for the input and the negative pole with the negative pole. Please also refer to your
receiver's/amplifier's and loudspeakers' instructions.

POSITIONING

The frequency range reproduced by the subwoofer cannot be pinpointed by the
human ear. That's why positioning generally doesn't present any problems. However,
it is preferable to place the speaker close to the front loudspeaker in front of the
listening position. You should also make sure that the distance from the sides to items
and walls is at least 20 centimetres and at least 20 centimetres from the rear as
otherwise bass reproduction may be impaired.
8