Typical Applications; About This Chapter; Overview; Task Management Application - Zte R800 Handbook

6. T A
YPICAL PPLICATIONS

About This Chapter

Chapter

6.1 Overview

6.2 Task Management Application

6.3 DTU Functional Application
6.1. Overview
R800 LTE Router is widely applied. The commonly used functions include task management, DTU function applications. The
following discusses the above typical application scenarios provided by the R800 LTE Router system.
6.2. Task Management Application
Scenario Introduction
R800 LTE Router supports task management by sending some instructions from the WEB page to the router including reboot
and online to enable the router to perform these actions within a specified time. Task management can readily enable the router to
perform some routine functions, in order to save artificial operations. Here, we set the router to go online at a certain time every day
and maintain its online state over a period of time; meanwhile, we also set to reboot every 24 hours to ensure a smooth network
provided by the router.
Parameter Configuration
See "5.3.6 Task Management" for parameter configuration, as shown in Figure 6-2-1.
Application Results
The router will go online at 10:05, maintain online from 10:05 to 10:08, and go offline at 10:09, from the 1st day to the 10th
day of a month, as shown in Figure 6-2-2 and Figure 6-2-3. Similarly, if set to reboot, the router will begin timing and perform
"reboot" every 24 hours, as shown in Figure 6-2-4.
Brief Introduction
This section gives you an overview of several typical application functions of R800 LTE Router.
This section introduces the practical application of the task management function of R800 LTE Router.
This section introduces the practical application of the DTU function of R800 LTE Router.
Figure 6-2-1 Parameter Configuration
79
R800
HANDBOOK