General Problems With The Tumble Dryer - Miele TWI 180 WP Operating Instructions Manual

General problems with the tumble dryer

Problem
You can hear operating
noises (buzzing/
humming).
A program does not
start.
The display is dark and
the Start/Stop button is
flashing slowly.
The tumble dryer is
switched off at the end
of the program.
The display is in a
different language.
The interior drum
lighting does not come
on.
Frequently Asked Questions
Possible cause and solution
This is not a fault.
The compressor (heat pump) is operating or you have
selected the Soft Steam program.
 No action required. These noises are quite normal
and can be heard when the compressor or the
condensed water pump is operating.
There is no obvious cause.
 Connect the power plug.
 Turn on the tumble dryer.
 Close the door.
 Check whether the fuse has tripped.
Power outage? When power is restored, any
previously running program will restart automatically.
The display has switched off automatically to save
energy (Standby mode).
The drum will turn at intervals in the Anti-crease
phase.
 Press any button. Standby will end.
The tumble dryer switches off automatically. This is
not a fault, but a normal function.
 See "Settings – Appliance switch-off".
A different language has been selected in "Settings,
Language ".
 Set the language you want. The flag symbol will
guide you.
Not a fault. The drum lighting switches off
automatically in the following cases:
If the door is closed.
If the door remains open for an extended period of
time.
61