Cleaning; Cleaning The Plinth Filter Flap - Miele TWI 180 WP Operating Instructions Manual

Heat-pump dryer
Table of Contents

Advertisement

Cleaning and care

Cleaning

 Pull the handle out of the plinth filter.
 You can brush off a heavy build-up of
lint on the plinth filter or remove it
with a vacuum cleaner.
 Clean the plinth filter thoroughly
under clear, running water.
Do not add any chlorine-
containing cleaning agents or
detergents to the water.
In the long run, these detergents
could damage the plinth filter
material and make it brittle.
The plinth filter must not be
replaced dripping wet. This can
cause a fault.
 Carefully squeeze the water out of the
plinth filter.
 Use a damp cloth to remove any lint
from the handle.
54

Cleaning the plinth filter flap

 Use a damp cloth to remove any lint.
Make sure that you do not damage
the rubber seal when doing this.
 Check whether the cooling fins are
blocked with lint (as follows).

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TWI 180 WP and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF