Table of Contents
Advertisement
EBU30804
Replacing a fuse
For non-EPS models
2
3
1
1. Fuel injection system spare fuse
2. Fuel injection system fuse
3. Main fuse
4. Fuse box
4
1. Auxiliary DC jack fuse
2. Four-wheel-drive motor fuse
3. Ignition fuse
4. Radiator fan motor fuse
5. Signaling system fuse
6. Headlight fuse
7. Spare fuse
8-54
1 2
3 4 5
6
7
8
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Kodiak 450 and is the answer not in the manual?
Questions and answers
my display unit stopped working, it does not light up or show gas gage or anything. whats wrong?
The display unit on a Yamaha Kodiak 450 could stop working due to several reasons:
1. Battery Issues – A dead battery can cause power loss, which may affect the display.
2. CDI Failure – A failed CDI unit could impact the electrical system, leading to display failure.
3. Corroded Wiring – Corrosion in the wiring, particularly the brown and blue power wires, can prevent the display from receiving power.
4. Damaged Harness – A chewed or broken wiring harness can interrupt the power supply to the display.
5. Cracked Screen – Physical damage, such as a cracked display cover, could impact functionality.
6. PCB Damage – If the display unit's circuit board is damaged or riveted incorrectly, it may stop working.
These issues should be inspected and repaired accordingly to restore display functionality.
This answer is automatically generated