Silca FUTURA PRO Operating Manual page 50

EU DECLARATION OF MACHINE COMPLIANCE
SILCA S.p.A. - VIA PODGORA 20 ( Z.I.)
31029 VITTORIO VENETO (TV) - (ITALY)
TEL. 0438 9136 - FAX. 0438 913800
Declares under its own responsibility that the Key-cutting machine model
FUTURA PRO
complies with the requirements of the following European Directives:
European Union DIRECTIVE 2006/42/EC
European Union DIRECTIVE 2014/30/EU
European Union DIRECTIVE 2014/53/EU
European Union DIRECTIVE 2014/35/EU
and with the
EN 55032:2015
EN 55022:2010
EN 55024:2010
EN 61000-3-2:2014
EN 61000-3-3:2008
EN 301 489-1:2011 (V1.9.2)
EN 301 489-17:2012 (V2.2.1)
Standards
Maurizio Ugel of the Silca S.p.A. Research & Development Division is authorized to create a Technical
File.
VITTORIO VENETO 26/10/2016
General Manager Basic Production Center
Serial Number ___________________________________
(Machines)
(Electromagnetic Compatibility)
(RED)
(Low Voltage)
ETSI EN 300 328:2015 (V1.9.1)
EN 60825-1:2014
EN 62471:2015
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011+A2:2013
EN ISO 12100:2010
EN 62233:2008
| 16 |