4.1 Position of the terminal box provided by the manufacturer of said products and not by GRUNDFOS' warranty. 4.2 How to change the terminal box GRUNDFOS will not be liable for damage or position wear to products caused by abnormal operating 4.3 Installation requirements...
3.1 Introduction Open systems Model UP(S) 15, 26, 43 and 50 series pumps Grundfos pumps are carefully inspected and with stainless steel or bronze pump housings tested before shipment. This pump should are designed to pump water compatible with provide long, efficient, trouble-free performance.
3. Apply the enclosed round "Check Valve pump. Grundfos circulator pumps can be Removed" label over the check mark symbol installed in both vertical and horizontal lines. located on the nameplate of the pump.
5. Electrical installation 5.1 For all 115 V and 230 V models 5.1.1 Single-speed pump wiring WARNING 1. Connect the white/white electrical leads from the circulator pump to the incoming power All electrical work should be leads with wire nuts or other approved performed by a qualified electrician in connectors.
Do not start the pump before filling Caution 2. If this is not possible, contact the nearest the system. Grundfos company or service workshop. Never let the pump run dry. Caution Subject to alterations. 7. Operation Grundfos domestic circulator pumps, installed...
Need help?
Do you have a question about the UPS 15-35 and is the answer not in the manual?
Questions and answers