Samsung CMD6638 Instruction Manual page 10

predetermined time, to save battery. This function can be set to 1 minute, 2 minutes, 5 minutes, 10
minutes, or disabled by selecting off.
The monitor will go to black screen to save battery after the time you have set (1minute, 2 minutes, 5
minutes or 10 minutes).
It will be activated by pushing any button on the front panel of monitor or by higher sound detected by
cameras.
If it is activated by pushing any button (except OK button) on front panel of monitor, the monitor will go
back to black screen after the time you set if there is no sound trigger during that time.
If it is activated by higher sound (sound trigger), it will go back to black screen about 8 seconds after the
last trigger.
Brightness
The Brightness menu is used to adjust the brightness of the
image.
Use the UP and DOWN arrows to change the bar from
DARKEST (bottom) to LIGHTEST (top). Press the OK button
to confirm the change.
Zoom
The image can be set at original size or double size by
selecting zoom x1 and zoom x 2. In double size mode, press
the navigation buttons to view the parts out of the LCD screen.
Settings
The Setting Menu contains 10 submenus:
1). Auto Mute – Auto mute function is to automatically cut off
the audio when there is only slight environmental noise on
camera side. In the submenu you can switch on/off this
function.
2).Time Alarm-Sets the time to awake you as alarm clock
3). Screen Saver – 5 pictures are stored in the system. You
can select one picture to make it be shown on the LCD screen
in scan mode. Or you can select Blank screen to make the
LCD screen display nothing in scan mode.
4)Date& Time-sets the time value to show in the monitor screen
5)Trigger Alert- Select the alert manner while something be detected.
9