Advertisement
Advertisement
Table of Contents
Related Manuals for Samsung SEW-3034WN
Summary of Contents for Samsung SEW-3034WN
-
Page 1: User Manual
WIRELESS MONITORING SYSTEM User Manual SEW-3034WN , SEB-1017RW... - Page 2 Samsung Techwin Co., Ltd. activities of a child. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. • Before using this product, read and follow all instructions contained in this booklet, and Other trademarks mentioned in this manual are the registered trademark of their read and follow all instructions and warnings on the product.
-
Page 3: Table Of Contents
• Do not use extension cords with the AC power adapters to avoid entanglement. • This product should only be serviced by qualified and authorized Samsung service centers. How to Install ………………………………………………… 9 • Images and sounds are transmitted by the product over public airwaves and transmissions may be picked up by other units. -
Page 4: GettingStarted
The system comes with the following components: Features • Samsung’s digital wireless technology provides excellent image quality and clarity. • Virtually eliminates interference using a secure and private signal • Up to 100m/330ft wireless open space transmission range. -
Page 5: Getting To Know Your Monitoring System
Getting to know your Monitoring system Wirelessreceiver After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. FrontControls receiverAntenna MenuButton Receives and sends signals from or to the camera. Press to access the receiver menu. Press the button again to exit. - Page 6 BackControls A/Mrecord AntennaLockingSwitch Press to auto record or manual record during monitoring. Slide the switch to unlocking position, the receiver antenna A : Start recording when the alarm is detected. will pop up. B : Press to the button will be recorded. Then you can adjust the antenna for better signal reception.
- Page 7 WirelessCamera Front&BackControls CameraAntenna nightLightSwitch Sends & receives signals to or from the receiver. Press to turn the night light ON or OFF. Alternatively, press the light button on the receiver to remotely turn the camera light ON or OFF. Lens/irLedCover Infrared LED’s provide viewing in no/low light conditions.
- Page 8 SideControls Cameraon/oFFSwitch SoundAlarmTrigger Turns the camera ON or OFF. Adjust the sensitivity knob to set the sound alarm sensitivity. The receiver will beep to alert you when the sound is above a preset sound level. Cameraonandlowbatteryindication Adjust to increase or decrease the level of sensitivity. Turn on the camera, the LED light will blink green once;...
-
Page 9: How To Install
Mountthecameratothewall. nStallation Mark the position of the screw holes on the wall, and drill holes and insert 2 screws, then firmly attach the camera to the wall by placing the stand over the installed screws and pushing the How to Install base downwards. -
Page 10: Viewing Mode Display
AutoMute Viewing Mode Display If you set Auto Mute to <YeS>, the applicable message appears on the screen. MicroSdcardstatus Wirelessreceiver Indicates when a Micro SD card is inserted. It displays the recording type if you press record button. A/Mrecord Press to auto record or manual record during monitoring. SEW-3034 REC A : Auto Recording - Start recording when the alarm is detected. -
Page 11: MenuOperation
peration powerSaving Enables receiver power save mode (when no activity on the camera is detected). The Power Saving Menu is used to turn off the screen at a predetermined time, Menu Operation to conserve battery power. After selected time, the monitor will go to a select screen saver or black screen if blank is selected as the screen saver. - Page 12 pairingCamera dateFormat Sets the date format to show in the monitor screen. Power on and turn the switch to ON. The power LED for the camera and receiver should be ON. TimeSetiing Press the [Menu] button on the receiver. Sets the time value with hour, minute to show in the monitor screen. Select Pairing menu by pressing [A] or [M] key.
-
Page 13: Appendix
ppendix Specifications Item Details Item Details Hardware and CD driver installation Camera Operating Humidity Transmit Frequency Weight Put CD into CD ROM on computer and click the 143.5 g 2.400GHz~2.4835GHz Range icon of Install USB Driver to run installation Size(WXHXD) 94 X 148 X 94 mm program. -
Page 14: Troubleshooting
Troubleshooting If you have problems with the system, there is often a quick and simple solution. Please Samsung Techwin cares for the environment at all product manufacturing stages, and is try the following: taking measures to provide customers with more environmentally friendly products. - Page 15 67mm[2.6inch] TEMPLATE Screw holes for the Camera installation This template is used to install the camera on the wall. CAMERA FRONT...
- Page 16 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com...