Marking A Time Region - iZ Technology RADAR 24 Operation Manual

To modify the record crossfade:
1. Use the
MENU/PREV
and press the
ENTER
2. Use the right and left arrow keys to select the
numeric keys or the Jog/Shuttle wheel to set the
3. Use the right and left arrow keys to select the
numeric keys or the Jog/Shuttle wheel to enter the desired value and press the
To modify the edit crossfade:
1. Use the
MENU/PREV
and press the
ENTER
2. Use the up and down arrow keys, the numeric keys or the Jog/Shuttle wheel to set the edit crossfade
time and press the
To modify the crossfade type:
1. Use the
MENU/PREV
and press the
ENTER
2. Use the right and left arrow keys to select the crossfade type and press the
Note: Only

Marking A Time Region

Time regions are selected for editing using the
the KC-24 keyboard. You may also specify a
marker can be used as the anchor to paste a track-region. This is very useful for pasting sound effects to
SYNC
spotted video locations.
Example: A door creaks as it slams and is followed by reverberation.
MARK IN
CREAK.................. ...SLAM! - REVERB.....................
To mark a region for editing:
1. Locate the point for your edit. Use the Jog/Shuttle wheel or other transport/locate functions to
IN
locate and press the
, arrow keys and
ENTER
key.
, arrow keys and
ENTER
key.
key.
ENTER
, arrow keys and
ENTER
key.
, and
MOVE ERASE
MARK SYNC
key on the Session Controller or the KC-24.
MARK IN
key to go to the
MAIN / EDIT MENU / REC XFADE TIME
crossfade time. Use the up and down arrow keys, the
IN
crossfade time.
IN
crossfade time. Use the up and down arrow keys, the
OUT
key to go to the
MAIN / EDIT MENU / EDIT XFADE TIME
key to go to the
MAIN / EDIT MENU / CROSS FADE TYPE
are affected by the
SLIDE CROSSFADE TYPE
and
MARK IN MARK OUT
marker that defines a particular event in the audio. This
SYNC
MARK OUT
79 79 79 79
key.
ENTER
key.
ENTER
setting.
keys on the Session Controller or
menu item
menu item
menu item