Renumber Project; Track Management; Naming Tracks - iZ Technology RADAR 24 Operation Manual

Renumber Project

To renumber a project:
1. Use the
MENU/PREV
and press the
ENTER
2. Use the numeric keys, the up and down arrow keys or the Jog/Shuttle wheel to select the new project
number and press the
a. If the new project number is already used for an existing project you will get a prompt similar to the
following:
SWAP XX WITH XX?
NO YES
b. If the new project number is unused you will get this prompt:
RENUM XX TO XX?
NO YES
3. Use the / keys on the keyboard or the right and left arrow keys to make your selection and press the
N Y
key.
ENTER

Track Management


Each RADAR 24 project contains 24 discrete tracks for recording audio. Each track has its own dedicated
input and output. There is no need to assign voices or assign recording directories. In fact none of the track
management chores required by digital audio workstations apply at all! RADAR
so you can get your work done quickly and easily.

Naming Tracks

If you wish you can name your tracks when using the RADAR View display.
To name a track:
1. Press the
NAME TRACK
MENU / NAME TRACK
2. Use the track arming keys or the up and down arrow keys to select a track.
3. Use the right or left arrow keys to move to the name field and type in a name using the keyboard and
press the key.
ENTER
, arrow keys and
ENTER
key.
key
ENTER
key or use the
MENU/PREV
selection and hit the
ENTER
key to go to the
MAIN / PROJ MENU / RENUMBER PROJECT
, arrow keys and
key.
49 49 49 49

24 takes care of all the details
key to go to the
ENTER
selection
MAIN / PROJ