Troubleshooting - SBS -6500 User Manual

⑤ Remove battery packs and replace with new battery packs.
⑥ Make sure to match the (+, - ) contacts of battery packs and ( +, - ) terminals in the
battery compartments. Replace the battery covers.
⑦ Reassemble in the reverse order of the steps above.
14.4.

Troubleshooting

In the event the unit is not functioning properly, check the following:
① Check battery polarity and that the batteries are fully charged.
② Inspect the case for physical signs of damage/cracks.
③ Check the fuse and test probes.
④ Contact technical support.
14.5. Test Probe Pin Replacement
When tip of the test probe is broke, damaged or abraded, replacement tips are available.
Power off and separate test probes from the SBS-6500.
①
Twist the head area where tip is threaded onto probe handle.
②
Pull on tip and separate tip from the lead wire.
③
④ Assemble the tip and test probe in the reverse steps as shown above.
⑤ Check the accuracy of measurement with the new tips. Zero "0" adjust the unit before
taking measurements.
To prevent damage make sure the cables are tight with no movement of the pin tips or
movement of the cable.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
SBS-6500 User Manual
Storage Battery Systems, LLC.
TestEquipmentDepot.com
82