Siemens SIMATIC RF310M Operating Instructions Manual page 33

NOTICE
Avoid several tags in the field of the SIMATIC RF310M
Please ensure that when executing the tag functions, the minimum distances from
transponders are observed, that is, distances between 100 and 500 mm depending on the
tag type. (See the System Manual SIMATIC RF300 > RF300 planning the system > Field
data of transponders, readers and antennas).
Tags that follow each other closely, and are therefore in the area of the SIMATIC RF310M
at the same time, can result in errors in reading and writing the tag data.
Figure 6-6
Tag in the blue area [①]
Tag in the gray area [①]
Tag outside the gray area [③]:
Only one tag must be located within the combined blue and gray area (① and ②).
SIMATIC RF310M Mobile Reader
Operating Instructions, 07/2007, J31069-D0191-U001-A1-7618
Tag acquisition area of the reader
6.5 The functions in the "Tag" menu
Tag is being edited
Tag can still be edited
Tag is not being edited
SIMATIC RF310M software
33