Siemens SIMATIC RF310M Operating Instructions Manual page 27

Interface structure of the data editor
Interface
The "current area"
Current area
SIMATIC RF310M Mobile Reader
Operating Instructions, 07/2007, J31069-D0191-U001-A1-7618
Item Description
① MDS type or MDS size
② Data field
The data at which the cursor is located is represented
alternatively in the formats hexadecimal, decimal, ASCII or
binary. The data field can be modified with the Data Edit
(Page 42) function.
③ The editor window contains the MDS data. The size of the
represented data depends on the MDS type.
④ MDS addresses are represented in hexadecimal or decimal
format.
Description
The "current area" is displayed in green in the editor. All other data
areas of the MDS are against a white background.
The current area shows the last edited, read or overwritten data
area. When reading/writing, the address of the current area is
preassigned as the value for the read/write command. However,
this value can be adapted when executing the command.
The current area is changed automatically when you edit and
overwrite data in the editor, or when you write data.
SIMATIC RF310M software
6.3 The data editor
27