Kenwood DDX795 Instruction Manual page 77

Specifications Specifications
FM tuner section
Frequency Range DDX795/DDX775BH/DDX595/
DDX575BT:
87.9 MHz to 107.9 MHz
(200 kHz)
DDX6018BT/DMX6018BT/
DDX5018BT/DDX718WBTL/
DMX718WBTL:
87.5 MHz to 108.0 MHz
(50 kHz)
Usable Sensitivity 7.2 dBf (0.63 μV/75 Ω)
(S/N: 30 dB, Dev.
22.5 kHz)
Quieting Sensitivity 15.2 dBf (1.58 μV/75 Ω)
(DIN S/N: 46 dB,
Dev. 40 kHz)
Frequency Digital: 20 Hz to 20 kHz*
Response (±3.0 dB) Analog: 30 Hz to 15 kHz
Signal to Noise Ratio Digital: 75 dB (STEREO)*
Analog: 68 dB (MONO)
Selectivity (±400 > 80 dB
kHz)
Stereo Separation 40 dB (1 kHz)
* Only for DDX795/DDX775BH.
AM tuner section
Frequency Range 530 kHz to 1 700 kHz (10 kHz)
Usable Sensitivity 29 dBμ
Frequency Digital: 40 Hz to 15 kHz*
Response (±3.0 dB)
Signal to Noise Ratio Digital: 75 dB (STEREO)*
* Only for DDX795/DDX775BH.
Video section
Color System of NTSC/PAL
External Video Input
External Video Input 1 Vp-p/75 Ω
Level (RCA jack)*
External Audio Max 2 V/25 kΩ
Input Level (RCA
jack)*
Video Input Level 1 Vp-p/75 Ω
for Rear Camera
(RCA jack)
Video Output Level 1 Vp-p/75 Ω
(RCA jack)
Analog RGB Input* 0.7 Vp-p/75 Ω
* Only for DDX6018BT/DMX6018BT/DDX5018BT/DDX718WBTL/
DMX718WBTL.
Audio section
Maximum Power 50 W × 4
(Front & Rear)
Full Bandwidth 22 W × 4 (at less than 1% THD)
Power (Front & Rear)
Preout Level DDX795/DDX595:
5 V/10 kΩ
DDX775BH/DDX6018BT/
DMX6018BT/DDX5018BT/
DDX575BT/DDX718WBTL/
DMX718WBTL:
4 V/10 kΩ
Preout Impedance ≤ 600 Ω
Speaker Impedance 4 Ω to 8 Ω
Equalizer Band: 13 Band
Frequency (Hz):
62.5/100/160/250/400/630/
1k/1.6k/2.5k/4k/6.3k/10k/
16k
Gain (dB):
–9/−8/−7/−6/−5/−4/−3/−2/
−1/0/1/2/3/4/5/6/7/8/9
ENGLISH 75