Working With Dxf Files - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece

6.17 Working with DXF files

References
Programming Manual Measuring Cycles / 840D sl/828D
Note
You have the option of changing the feedrate velocity in operation.
See also
Current block display (Page 38)
6.17 Working with DXF files
6.17.1 Overview
The "DXF-Reader" function allows you to open files created in SINUMERIK Operate directly
in a CAD system and accept and store contours directly in G-code.
The DXF file can be displayed in the Program Manager.
150
3. Press the menu forward key and the "Settings" softkey.
The "Settings for Automatic Operation" window opens.
4. In "DRY run feedrate," enter the desired dry run speed.
5. Enter the desired percentage in the "Reduced rapid traverse RG0" field.
RG0 has no effect if you do not change the specified amount of 100%.
6. Select the required entry in the "Display measurement result" field:
● "Automatic"
The measurement result window opens automatically.
● "manual"
The measurement result window is to be opened by pressing the
"Measurement result" softkey.
7. Select the required entry in the "Record machining times" and in the
"Save machining times" field.
Software option
You require the "DXF-Reader" software option in order to use this function.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 05/2017, A5E40868517
Universal