Philips HD4568 User Manual page 32

Problem
The valtage is not in the
normal range. E5 or E6
displays on the screen.
Overheat protection of
the inner circuit board. E7
displays on the screen.
Boil dry protection. E14
displays on the screen
The appliance stops working
suddenly, and other error
codes display on the screen.
EN
32
Solution
Check with specialist on whether the valtage is in the
•
normal range.
Check if too many appliances are plugged in the same
•
connector, or if the cord extension is too long.
If you cannot resolve the problem, do not disassemble the
•
appliance. Take the appliance to your Philips dealer or a
service center authorized by Philips.
Check if the air inlets at the bottom of the appliance is
•
blocked.
Check if the temperature around the appliance is too high.
•
When the error code displays on the screen, the
•
appliance switches off automatically. After the temperature
of the appliance drops down, if the appliance still works
fine, then the error is caused by overheat protection.
If you cannot resolve the problem, do not disassemble the
•
appliance. Take the appliance to your Philips dealer or a
service center authorized by Philips.
Check if there is no water or very little water in the inner
•
pot.
Check if the inner pot is overheated.
•
During the cooking process, if the appliance boils dry, the
•
boil dry protection will be activated. This is normal. Switch
off the appliance when the error code displays, unplug the
appliance and take out the inner pot. When the inner pot
and appliance cool down, they will resume working.
If you cannot resolve the problem, do not disassemble the
•
appliance. Take the appliance to your Philips dealer or a
service center authorized by Philips.
The power source has malfunction. Take the appliance to your
Philips dealer or a service center authorized by Philips.