Kinetico K5 Manual page 33

Sanitization Procedure for K5 WOW –
1. Close feed.
4. Remove postfilter and
install cartridge plug.
postfilter
7. Close feed.
Note: Do not over tighten.
10. Turn jack screw
completely (clockwise).
Note: Do not
over tighten.
Revised: 09/2016
2. Open faucet to
depressurize system.
5. Open feed.
cartridge plug
8. Wait 3 minutes.
11. Remove all remaining
cartridges.
Drinking Water Systems
K5 Drinking Water Station
Household Bleach (unscented)
cartridges
Page 33
3. Attach anti-spray line and
close faucet.
anti-spray line
6. Open faucet to empty
permeate from storage tank.
9. Close faucet.
12. Install cartridge plugs in
these locations, except
prefilter.
Install 4 plugs in these locations.
(RO, Auxiliary 1, Auxiliary 2, Post)
Section 7