Replacing The Coffee Boiler Heating Element - Sanremo Cafe Racer Technical Manual

Manual for technical
- Disconnect the connectors (8) of the heating ele-
ment and unscrew the nut (9) connecting the drain
tap.
- Replace the boiler by operating in inverse order
of removal, reconnecting the electrical cables ac-
cording to the attached wiring diagram.

7.6 Replacing the coffee boiler heating element

Cut the power to the machine by setting
the upstream main switch to OFF.
- Remove the RH side panel and the cup heating
plate as described in the relevant paragraphs.
- Open the tap (1) to drain the water from the boiler
(2).
- Disconnect all wires connecting the heating ele-
ment (3) to the machine wiring, unscrewing the
relevant nuts (4).
- Remove the Seeger ring (5) and guard (6).
- Remove the heating element (3).
- Refit everything operating in reverse order from
removal checking the condition of the heating ele-
ment and replacing it if it is worn.
- Connect the wiring following the instructions on
the wiring diagram attached to this manual.
04-2017
9
2
5
23 / 56-EN
CAFE RACER
8
1
3
4
3
EN
6