Configuring Self Healing - Brocade Communications Systems RFS6000 System Reference Manual

Provides centralized wireless lan (wlan) configuration and management

Hide thumbs Also See for RFS6000:

Table of Contents

Configuring self healing

The controller supports a feature called self healing that enables radios to take corrective action

when one or more radios fail. To enable the feature the user must specify radio neighbors that

would self heal if either one goes down. The neighbor radios do not have to be of the same type.

Therefore, an 11bg radio can be the neighbor of a 11a radio and either of them can self heal when

one of them fails.

The controller initiates self healing when it looses communication with the Access Point or when

another radio (configured in detector mode) informs the controller a particular radio is not

transmitting beacons.

To configure self-healing on the controller:

1. Select Services > Self Healing from the main menu tree.

The Self Healing page launches with the Configuration tab displayed.

Brocade Mobility RFS6000 and RFS7000 System Reference Guide

53-1001858-01