Brocade Communications Systems RFS6000 System Reference Manual page 172

4
Viewing and configuring controller WLANs
5. The Configured WLANs field displays available WLANs. Associate a list item (within the Include
6. To delete a device (and its configuration), select it from the Include Lists and click the Delete
7.
8. To delete any list configuration for a particular device, select the row from the List
Adding an include list to a WLAN
To add a device to a WLAN's include list configuration:
1. Select Network > Wireless LANs from the main menu tree.
2. Select the NAC Include tab to view and configure NAC Include enabled devices.
3. Click on the Add button in the Include Lists area.
4. Enter the name of the device to include for NAC authentication.
5. Refer to the Status field. It displays the current state of the requests made from the applet.
6. Click OK to save the new configuration and close the dialog window.
7.
Configuring devices on the include list
To add a multiple number of devices for a single device type:
1. Select Network > Wireless LANs from the main menu tree.
2. Select the NAC Include tab to view and configure all the NAC Include enabled devices.
3. Click on the Add button within the List Configuration area.
158
Lists field) with as many WLANs as required.
For information on mapping NAC Include list items with WLANs, see
to WLANs" on page 159.
button
Use the Edit button in the List Configuration section to modify the devices parameters.
Configuration section and click on the Delete button.
Requests are any "SET/GET" operation from the applet. The Status field displays error
messages if something goes wrong in the transaction between the applet and the controller.
Click Cancel to close the dialog without committing updates to the running configuration.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
"Mapping include list items
53-1001858-01