Advertisement
Quick Links
Advertisement
Related Manuals for Reflex Safari
Summary of Contents for Reflex Safari
- Page 1 FOLDING BIKE BASIC ASSEMBLY GUIDE...
- Page 2 CONTENTS ............page 2 ..........page 7 WARNINGS THE SADDLE ..........page 3 ...........page 8 KEY BIKE PARTS THE PEDALS ........page 4 .........page 9 BEFORE YOU START REFLECTORS AND BELL ...........page 5 ..........page 10 THE FRAME FINAL CHECKS ..........page 6 THE HANDLEBAR WARNINGS Always check that brakes work before each use - failure to set brakes correctly may result in serious injury or even death.
- Page 3 KEY BIKE PARTS FRONT REFLECTOR BRAKE LEVERS HANDLEBAR SADDLE HANDLEBAR STEM REAR REFLECTOR FRAME FRONT BRAKE & CABLE FORK PEDALS FRONT WHEEL BACK WHEEL WHEEL REFLECTORS...
- Page 4 BEFORE YOU START Remove all packaging. Take care not to scratch any paintwork. Please note - The plastic caps may have fallen off in transit if they are not on the bike. CARDBOARD CABLE TIES PLASTIC SAFETY CAPS (on front wheel & handlebar stem)
- Page 5 THE FRAME Swing the front of the frame round to meet the Swing the quick release arm anti-clockwise into the back of the frame folding bracket To join the folding mechanism you need to push Close the quick release lever as shown, ensuring it the quick release lever up as shown and join the folds up in a vertical direction.
- Page 6 THE HANDLEBAR Swing up into an upright position Swing the quick release arm up into the folding bracket To join the folding mechanism you need to push the quick release lever to the left, and join the Close the quick release lever as shown, ensuring it handlebar stem together folds down towards the rear of the bike...
- Page 7 THE SADDLE Ensuring the quick release lever is in the open position as shown, slide the saddle into the frame. Make sure you insert the saddle beyond the minimum insertion mark. Once the saddle is at your desired height, close the quick release lever as shown MINIMUM INSERTION MARK...
- Page 8 THE PEDALS Unfolding the pedals Yor folding bike comes with a folding pedal on the right side (chain side) of the bike. To open this, bring the pedal to a horizontal position, 90 degrees to the pedal arm. Keeping the pedal in this position, push it towards the pedal arm until you hear a click Unfolding the pedals Press the release buttons on either side of the pedal.
- Page 9 REFLECTORS AND BELL First fully release the securing screws as shown Wrap the bell around the handlebar as shown, remembering (anti-clockwise) to put it in a place where you can reach it easily whilst riding. Then wrap the white reflector around the handlebar near the centre, and wrap the red reflector in the same way around the saddle post.
- Page 10 FINAL CHECKS You can now ensure your saddle and handlebars are at a comfortable riding position, and fully tighten. Always be aware of the minimum insertion mark and make sure these are inserted beyond this point. Check tyre pressures regularly. Recommended tyre pressures are clearly marked on the side of the tyre. Check that all bolts and xings are tight and secure.
Need help?
Do you have a question about the Safari and is the answer not in the manual?
Questions and answers