D20 Modems - GE D20 Technical Overview

Remote terminal unit
Hide thumbs Also See for D20:
Table of Contents

Advertisement

GE Grid Solutions

2.6 D20 Modems

The D20 modems handle communications to the host computer or other intelligent device.
Special modem requirements can be addressed through the use of third-party modems, which are
connected to the D20/D200 through external RS-232 connections. Refer to Table 22 for details.
Modem
WESDAC 202/V.23
Telenetics V.3600
Telenetics MIU9.6FPD,
MIU/PowerPort9.6FPD
Telenetics Chassis-mount
GE Information
Table 22 D20/D200 Modems
1200 bps Bell 202 or CCITT V.23
Designed for 300 to 1200 bps asynchronous operation
on unconditioned lines
Available as a 19" rack-mount assembly (GE Part
Number 520-0090), or as a 3U vertical-mount module
that can be installed in the D20/D200 chassis (GE Part
Number 520-0120).
V.34/V.42.bis
2-wire, full-duplex dial-up or leased line; 4-wire, full-
duplex leased line
Data rates up to 33.6 kbps
o
0 to +50
C, 0 to 95% non-condensing
Substation hardened, surge protected
2-wire half duplex, 4-wire full duplex
Data rates up to 57.6 kbps
o
-40 to +85
C, 0 to 95% non-condensing
Point-to-point, or multipoint configurations
Dial-up or leased line
2-wire or 4-wire
Various versions available, up to 57.6 kbps
PRPI-019-3.00-10
D20/D200 Technical Overview
Specifications
67

Advertisement

Table of Contents
loading

This manual is also suitable for:

D200

Table of Contents