Attaching The Stand - Sharp AQUOS LC-80LE661U Setup Manual

Attaching the Stand

■ LC-70LE661U/LC-60LE661U
1
■ LC-80LE661U
■ LC-70LE661U/LC-60LE661U
2
1
2
■ LC-80LE661U
1
3
3 • Screws
1
1
2
3
• Before attaching (or detaching) the
stand, unplug the AC cord.
• Before performing work spread
cushioning over the base area to lay the
TV on. This will prevent it from being
damaged.
CAUTION
• Be sure to follow the instructions.
Incorrect installation of the stand may
result in the TV falling over.
1
Confirm that there are 10 screws
(80 inch model: 12 screws) supplied
with the stand unit.
2
Set the post for the stand unit onto
the polystyrene foam.
Attach the base to the post.
Insert and tighten the 6 screws
into the 6 holes (80 inch model:
8 screws into the 8 holes) on the
bottom of the base.
• Hold the stand unit securely with one
hand, and then tighten the screws.
• In the installation procedure, be
careful not to catch your fi ngers
between the TV set and the fl oor.
• Do not remove the stand from the
TV unless using an optional wall
mount bracket to mount it.
• After attaching the stand to the
TV, do not hold the stand when
you put up, set up, move or lay
down the TV.