Sharp Aquos LC-80LE642U Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. LCD TV
  5. Aquos LC-80LE642U
  6. Operation manual

Sharp Aquos LC-80LE642U Operation Manual

Liquid crystal television
Hide thumbs Also See for Aquos LC-80LE642U:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Setup Manual
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE
CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN
IMPORTANT
: Please read this operation manual before
starting operating the equipment.
IMPORTANT
: Veuillez lire ce mode d'emploi avant de
commencer à utiliser l'appareil.
IMPORTANTE : Lea este manual de operación antes de
comenzar a operar el equipo.
LC-80LE642U

Advertisement

Table of Contents
loading

Related Manuals for Sharp Aquos LC-80LE642U

Summary of Contents for Sharp Aquos LC-80LE642U

  • Page 1 LC-80LE642U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANT : Veuillez lire ce mode d’emploi avant de commencer à...
  • Page 2 Skype™ is supported by this TV set. For details, refer to the following: • For the operation manual: http://www.sharpusa.com (USA) http://www.sharp.ca (Canada) http://www.sharp.com.mx (Mexico) • For information on the communication camera: http://freetalk.me/product/sharp/ • For details on Skype: http://www.skype.com Ce téléviseur est compatible avec Skype™. Pour les détails, reportez-vous à : •...

  • Page 3: Important Information

    DECLARATION OF CONFORMITY: This product contains a CR Coin Lithium Battery which contains Perchlorate Material – special SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-80LE642U handling may apply, California residents, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two U.S.A.

  • Page 4: Dear Sharp Customer

    DEAR SHARP CUSTOMER IMPORTANT SAFETY INSTRUCTIONS Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many e) If the product has been dropped or damaged in any way, and years of trouble-free operation of your product, please read the Important Safety Instructions f ) When the product exhibits a distinct change in performance - this indicates a need for carefully before using this product.
  • Page 5 • Televisions can be heavy. A minimum of two people is required for a wall or • Wiping with a hard cloth or using strong force may scratch the surface of the front ceiling mount installation. panel. • Use a soft damp cloth to gently wipe the front panel when it is really dirty.(It may scratch the surface of MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME the front panel when wiped strongly.) • Many new television buyers move their older CRT televisions into a secondary • If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it. room after the purchase of a flat-panel television. Special care should be made • To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning in the placement of older CRT televisions. cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. • ALWAYS place your older CRT television on furniture that is sturdy and Call 1-800-BE-SHARP for ordering, or VISIT http://www.sharpusa.com/SharpDirect. appropriate for its size and weight. • NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb. • ALWAYS make sure your older CRT television does not hang over the edge of your furniture. CE.org/safety...

  • Page 6: Accessories

    Accessories Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit (x1) "AAA" size battery (x2) AC cord (x1) Stand unit (x1) Page 8 Page 8 Page 7 Page 6 ■ Operation manual (this publication)  Connection guide NOTE • Always use the AC cord supplied with the TV. • The illustrations above are for explanation purposes and may vary slightly from the actual accessories.

  • Page 7: Table Of Contents

    Contents IMPORTANT INFORMATION ......1 Direct Button Operation Using a PC Dimensional Drawings DEAR SHARP CUSTOMER ......... 2 Changing Channels ........ 16 Adjusting the PC Image ....... 39 • The dimensional drawings for the LCD TV set are IMPORTANT SAFETY INSTRUCTIONS ...2-3 Changing Volume........16 Setting Audio Input ........39 shown on the inside back cover. MUTE ............ 16 Accessories............4 Control of the TV ........39-40 FREEZE ..........

  • Page 8: Quick Reference

    QUICK REFERENCE • Before attaching (or detaching) the stand, unplug the AC cord. Attaching the Stand • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. Building the Work Table CAUTION Before attaching the stand to the TV, build a work The case is equipped with push-in tabs to • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. table on which to rest the TV. hold the cushioning materials in place. Push • To build the table, use the cushioning materials in the tabs (2 for each location) to secure the Confirm that there are 12 screws (8 long screws Insert and tighten the 4 screws into the 4 holes used in the packaging. cushioning materials in the case.

  • Page 9: Quick Installation Tips

    QUICK REFERENCE QUICK INSTALLATION TIPS Experiencing HD Images An HDTV without an HD source is just an ordinary TV. Attach your antenna to the back of the television. To enjoy HD images on the TV, you should get (See page 8.) HD programming from the following: Connect the AC plug for the television into the • Over-the-air broadcasting via HD quality antenna AC outlet. • HD cable/satellite subscription • Place the TV close to the AC outlet, and keep the • HD compatible external equipment power plug within reach.

  • Page 10: Installing Batteries In The Remote Control Unit

    75-ohm coaxial cable (round) 2. A 300-ohm system is a flat "twin-lead" cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter. CAUTION IMPORTANT: 300-ohm twin-lead cable (flat) F-type connector should be finger-tightened only. NOTICE IF THE UNIT DOES NOT POWER ON - UNPLUG Improper use of batteries can result in chemical leakage F-type connector THE TELEVISION FROM THE OUTLET AND REPEAT When connecting the RF cable to the TV set, do not tighten or explosion. Be sure to follow the instructions below. THE INSTALLATION STEPS. F-type connector with tools. • Do not mix batteries of different types. Different types If tools are used, it may cause damage to your TV set. (The IF YOU STILL ENCOUNTER NO POWER, PLEASE of batteries have different characteristics. breaking of internal circuit, etc.) CONTACT US AT 1-800-BE-SHARP. • Do not mix old and new batteries. Mixing old and new 75-ohm coaxial cable batteries can shorten the life of new batteries or cause chemical leakage in old batteries. • Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth. • The batteries supplied with this product may have a shorter life expectancy due to storage conditions. • If you will not be using the remote control unit for an extended period of time, remove batteries from it.

  • Page 11: Part Names

    DIGITAL AUDIO ETHERNET OUT terminal (VOLk/l) HDMI 4 terminal terminal MHL: Mobile High-Definition Link AUDIO IN terminal (See page 38.) (shared for PC IN * See pages 11, 14, 20 and 25 for button operations. and HDMI 2) *2 *1 See pages 11 to 13 and 36 for external equipment connection. *2 See page 39 for details on the Audio Select function. *3 Skype™ is available for the USB terminal. For details, refer to the following: • For the operation manual: http://www.sharpusa.com (USA) http://www.sharp.ca (Canada) http://www.sharp.com.mx (Mexico) • For information on the communication camera: http://freetalk.me/product/sharp/ • For details on Skype: http://www.skype.com...

  • Page 12: Remote Control Unit

    Part Names 1 POWER: Switch the TV power on or enter 21 A UDIO: Selects the MTS/SAP or the audio mode Remote Control Unit standby. (See page 14.) during multichannel audio broadcasts. (See page 17.) 2 TV, STB, DVD•VCR, AUDIO: Switches the remote control for TV, STB, BD, DVD, VCR 22 ENT: Jumps to a channel after selecting with the and AUDIO operation. (See pages 35 to 36 for 0–9 buttons. details.) 23 FLASHBACK: Return to the previous channel or * To enter the code registration mode, you external input mode. (See page 16.) need to press an appropriate button (STB, 24 VIEW MODE: Select the screen size. (See pages DVD•VCR or AUDIO) and DISPLAY at the 18 and 19.) same time. 25 INPUT: Select a TV input source. (TV, HDMI1, 3 External equipment operational buttons: HDMI2, HDMI3, HDMI4, COMPONENT, VIDEO1, Operate the external equipment.

  • Page 13: Introduction To Connections

    Introduction to Connections Types of Connection Displaying an External Equipment Image For connecting the TV to external equipment, use commercially available cables. To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. • The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products. ■ Connecting to video equipment or PC Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your external equipment and use its appropriate terminals for higher quality images. Image Terminal Terminal on external Cable Quality on the TV equipment HDMI-certified cable...

  • Page 14: Connecting To External Equipment

    Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the ■ When using a Component cable (COMPONENT): input source by pressing INPUT on the remote control unit or on the TV. (See pages 11 and 16.) • Blu-ray disc player • DVD player For connecting the TV to external equipment, use commercially available cables. • HD cable/satellite set-top box CAUTION • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections. Audio cable Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box AUDIO-R (Red) ■...

  • Page 15: Connecting A Surround System/Audio System

    Connecting to External Equipment Connecting a Surround System/Audio System Connecting a PC ■ When connecting an AV amplifier for a surround system Refer to page 40 for a list of PC signals compatible with the TV. HD Cable/Satellite set-top box ■ When using an HDMI cable (HDMI 1, 2, 3 or 4): HDMI-certified cable HDMI-certified cable *1 HDMI OUT HDMI OUT...

  • Page 16: Watching Tv

    Watching TV Press a/b to select the time zone where you Turning On/Off the Power Initial Installation NOTE are using the TV, and then press ENTER. • ENERGY STAR qualification is based on AV MODE When you turn on the TV for the first time, it will Example "STANDARD (ENERGY STAR)". automatically memorize the broadcasting channels POWER Antenna & Cable/STB available in the region where you live. Perform the Select the type of connection you will use to watch TV. following steps before you press POWER on the Press c/d to select "Antenna & Cable" or "Set- remote control unit. top box", and then press ENTER. 1. Insert the batteries into the remote control unit. (See page 8.) AKST 2. Connect the antenna cable to the TV. (See page 8.) Antenna & Cable Set-top box 3. Plug in the AC cord to the AC outlet. (See page 7.) HAST • The time zone differs depending on the selected To watch TV via an antenna or cable connection country.
  • Page 17 Watching TV CH Search (Channel search) Network Completed When "Set-top box" was selected in step 6. Channel auto search makes the TV look for all When you connect to the Internet on the TV, select The settings confirmation screen is displayed. Language : English channels viewable in the set area. the desired connection method and follow the Confirm the information displayed on the screen, Location & Time : United States/EST/Auto instructions shown on the display. TV Location : Home When "Air" is selected in Antenna setting: and then press ENTER.

  • Page 18: Direct Button Operation

    Direct Button Operation Changing Channels MUTE FLASHBACK You can change channels in several ways. Mutes the current sound output. Press FLASHBACK to switch to the previously Method 1 Press MUTE. tuned channel or previous input mode. Using CHr/s on the remote control unit or on the • " " will be displayed on the screen for 30 minutes, • Press FLASHBACK again to switch back to the and the sound is silenced. currently tuned channel. Method 2 NOTE NOTE Using remote control buttons 0-9, • (DOT). • FLASHBACK will not work if no channel has been • Within 30 minutes of pressing MUTE, mute can be Examples: changed after the TV is turned on. canceled by pressing VOLk/l or MUTE. To select a 1 or 2-digit channel number (e. g., • Mute will be canceled after 30 minutes have passed.

  • Page 19: Netflix

    Direct Button Operation The types of audio transmitted in a digital broadcast NETFLIX AV MODE include SURROUND as well as MONO and STEREO. Displays the Netflix screen. AV MODE gives you several viewing options In addition, it is possible for multiple audio tracks to to choose from to best match the surrounding accompany a single video track. Press NETFLIX. environment of the TV, which can vary due to factors Press ENTER to toggle between audio modes. like room brightness, type of program watched or NOTE the type of device connected. • To enjoy Netflix, you need to make: Example: when receiving Digital broadcasting —a broadband Internet connection (See page 41.) You can use USER Mode to create customized —settings of Internet Setup (See pages 41 to 42.) STEREO (Audio1) STEREO (Audio2) settings for each TV input. These settings will be —adjustments for Netflix (See page 44.) SURROUND (Audio3) automatically saved on each input for convenience. Press AV MODE. Current AV MODE displays. AUDIO NOTE • Press AV MODE again before the mode displayed on ■...

  • Page 20: Closed Captions And Digital Closed Captions

    Direct Button Operation • Depending on the number of caption services in the VIEW MODE Closed Captions and Digital Closed Captions signal being received, you will see information such as You can select the screen size. Your TV is equipped with an internal Closed Caption 1/2 or 1/4 displayed. decoder. It allows you to view conversations, 1/2 means "the first of two services". Press VIEW MODE. narration and sound effects as subtitles on your Example: • The View Mode menu displays. TV. Closed Captions are available on some TV If a program has three services (Digital CC(ENG), CC1 • The menu lists the View Mode options selectable for the type of video signal currently being received. and Text1), the closed caption display will toggle in this programs and on some VHS home video tapes at Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu. sequence: the discretion of the program provider. • You can sequentially select a View Mode that has its own aspect ratio. 1/3 ENG 2/3 CC1 3/3 Text1 NOTE Digital Closed Caption service is a new caption service available only on digital TV programs • The CC button keeps a record of the last service...
  • Page 21 Direct Button Operation ■ For USB-Video, DLNA-Video or Internet applications Example: Screen size images Input signal Auto Original Stretch Keeps the original Displays an image An image fully fills aspect ratio in a by an original size. the screen. full screen display. ■ For PC Example: Screen size images Input signal Normal Zoom Stretch Dot by Dot Keeps the original For viewing An image fully fills...

  • Page 22: On-Screen Display Menu

    ■ About Menu Items Button operations on the control panel correspond • When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu to the ones on the remote control as shown below. may be changed. • Some menu items may not be displayed depending on the selected input source. NOTE • The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens. • The order of explanations for each menu item in the following pages is not necessarily in accordance with the alignment of the items on the screen. MENU: Press to open or close the menu screen. a/b/c/d: P ress to select a desired item on the LCFONT: screen or adjust a selected item. • This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly ENTER: P ress to go to the next step or displaying easy-to-read characters on LCD screens. complete the setting. MENU: M ENU on the remote control. RETURN: Press to return to the previous step. INPUT: E NTER on the remote control. CHr/s: C ursor a/b on the remote control. VOLk/l: C ursor c/d on the remote control.

  • Page 23: Menu Items

    On-Screen Display Menu Audio Settings System Options Initial Setup Menu Items Example Example Example Menu Menu Picture Settings Audio Menu System Initial Settings Options Setup Example Menu Audio Settings System Options Picture Initial Setup Settings Auto Volume View Option Picture Settings EZ Setup [Off] Treble...

  • Page 24: Picture Settings

    On-Screen Display Menu OPC Setting Color Temp. (Color Temperature) Active Contrast Picture Settings For a better white balance, use color temperature Automatically adjusts the image contrast according Automatically adjusts the brightness of the screen. Adjusts the picture to your preference with the correction. to the scene. Off: The brightness is fixed at the value set in following picture settings. High: White with bluish tone Advanced: Produces higher contrast image "Backlight". Mid-High: especially in dark scene. On: Automatically adjusts. NOTE Middle: Standard: Produces high contrast image. On:Display: Displays the OPC effect on the screen • For operating the on-screen display menu, see page 20. Mid-Low: Off: No adjustment. while adjusting the brightness of the screen. Low: White with reddish tone Selected item c button...

  • Page 25: Audio Settings

    On-Screen Display Menu Film Mode (3:2 pull-down) Bass Enhancer Audio Settings This function provides high-quality playback of This function allows you to enjoy bass-enhanced You can adjust the sound quality to your preference images originally encoded at 24 frames/second, sound. with the following settings. such as films. NOTE Advanced: Adjusts effect to reduce judder from film NOTE • The Audio Settings menu is grayed out when "Output contents. You can select a desired level of judder • For operating the on-screen display menu, see page 20. Select" is set to "Variable". (See page 25.) reduction from 0 to +10. Standard: Plays back images with equal display Selected item c button d button Clear Voice time for each frame, reproducing movie theater For weaker For stronger experience.

  • Page 26: Power Control

    On-Screen Display Menu Change CC No Signal Off Power Control System Options Allows you to change the Closed Caption display. When this function is enabled, the TV automatically Power control setting allows you to save energy. Select "Change CC" on the menu to display the shuts down if no signal is received for more than 15 NOTE Closed Caption information. minutes. NOTE • For operating the on-screen display menu, see page 20. • The information displayed varies depending on the • For operating the on-screen display menu, see page 20. program you are watching. NOTE View Option Audio Only • When it is 5 minutes before the power shuts down, NOTE These functions are useful for adjusting the audio the remaining time will start to keep appearing every When listening to music from a music program, you and video settings. The View Option functions can • You can change Closed Caption by pressing CC on minute. can turn the screen off and enjoy audio only.
  • Page 27 On-Screen Display Menu Input Label Program Title Display Operation Lock Out Data Source Lets you set the input terminal displayed when using Select the CH display when changing channels for For the wallpaper, you can select either the still images This function locks the operation buttons on the TV the INPUT list or channel display. Press a/b/c/d digital broadcasting. pre-installed in the TV or your favorite still images stored and the remote control. in the USB memory device. to select the new name for the input mode. Off: No adjustment. Position Pre-Installed: The images pre-installed in the TV will • Using the software keyboard, you can enter up to RC Control Lock: All buttons on the remote control be displayed in a slideshow. 10 characters for text. (See page 42.) For adjusting a picture's horizontal and vertical are locked. USB: Your favorite images stored for the wallpaper position. Button Control Lock: All buttons on the TV, except NOTE will appear.

  • Page 28: Initial Setup

    On-Screen Display Menu Network: When you connect to the Internet on the Boot Picture Favorite CH (Favorite Channel Setting) Initial Setup TV, confirm the connection method and make This function allows you to program 4 favorite With this function activated, the SHARP logo will be adjustments. channels, in 4 different categories. By setting the displayed when you turn on the TV. • Wireless LAN connection is possible only when NOTE favorite channels in advance, you can select your the WPS (push button) method is used. If any • For operating the on-screen display menu, see page 20. NOTE favorite channels easily. other method is used, make settings by Initial • When you select "EZ Setup", "CH Setup", "Parental To register your favorite channel: Setup > Internet Setup > Network Setup. (See • This function is not available when the TV is set to CTRL" or "Reset", you can enter the 4-digit secret Select "Register" and then press ENTER. Press a/ pages 41 to 42.) "Quick Start Mode".
  • Page 29 On-Screen Display Menu ■ MPAA (Voluntary movie rating system) When setting an individual content-based rating Reset Parental CTRL item: (Parental Control Setting) Example If complex adjustments are made and the settings Press d or ENTER to access blocked content MPAA cannot be restored to normal, you can reset the items from the currently selected age-based Status TV Guidelines settings to the factory preset values. rating item. Can. English Ratings • If you have already set the Secret No., input the 4-digit Used to enable or disable the parental control Press a/b to select an individual item, and then Can. French Ratings PG-13 secret number here.

  • Page 30: Information

    NOTE the storyline, but it must be integral to the http://www.sharpusa.com/products/support/. If you • Performing any of the three above will activate the development of plot or character. Language This is used to upgrade the system software to have any questions, please V-CHIP BLOCK. usage could be profane and nudity present within enhance the TV functions. call 1-800-BE-SHARP (800-237-4277). the context of the theme. Press MENU to display the MENU screen, and 18+: Adults: Intended for viewers 18 years and older then press c/d to select "Information". CAUTION and might contain depictions of violence, which Press a/b to select "Software Update", and • Do not remove the USB memory device or unplug while related to the development of plot, character then press ENTER. the AC cord while the software is being updated.
  • Page 31 On-Screen Display Menu Press a/b on the Manual Update screen to To update the TV software with the update file, After the screen shown below is displayed, press select "USB Update", and then press ENTER. select "Yes", and then press ENTER. ENTER. Press ENTER to start checking the data in the Software update file is detected USB memory device. System software has been in the USB memory device. updated successfully. Start update? Insert the USB memory device Remove the USB memory device. containing the software update file. Update Version: UXXXXXX2 Current Version : UXXXXXX1...

  • Page 32: Enjoying Photo/Music/Video Playback

    Enjoying Photo/Music/Video Playback On-Screen Display Menu ■ Updating the Software via the Network You can connect the TV to a USB memory device, USB hard drive or Home Network (DLNA) server to enjoy After the update file is downloaded, the software viewing pictures, listening to music, and watching videos. update process begins. Press a/b on the Manual Update screen to select "Network Update", and then press NOTE Downloading the latest software.. ENTER. • Depending on the USB memory device/USB hard drive/Home Network (DLNA) server, the TV may not be able to • The TV connects to the network and checks for Update Version recognize the recorded data. updates. XXXXXXXX • It may take time to read the recorded data if the USB memory device/USB hard drive/Home Network (DLNA) server • To cancel, press ENTER. contains many files or folders. • Use only alphanumeric characters for naming files. Connecting to Internet.. Checking for the latest software version..

  • Page 33: Connecting A Home Network (Dlna) Server

    Enjoying Photo/Music/Video Playback USB Device Compatibility Home Network (DLNA) Server Compatibility Connecting a Home Network (DLNA) Server Photo file format USB USB Memory, USB card reader (Mass JPEG Connect the TV to the Home Network (DLNA) server using an ETHERNET cable. device Storage class), USB hard drive Music file format LPCM, MP3 • You can also connect a Home Network (DLNA) server by using a wireless LAN. File system FAT/FAT32/NTFS (USB hard drive only) Video file format MPEG2-PS, MPEG2-TS, Photo file JPEG (.jpg) (DCF2.0 compliant) WMV, ASF, MP4, MOV, AVI format Multi-Picture Format (.mpo) (CIPA DC- 007 Compliant)
  • Page 34 Enjoying Photo/Music/Video Playback USB Menu Music Mode Playing Back Files on a USB Memory NOTE Device/Home Network (DLNA) Server • When there are invalid photo files, the X mark will be On the menu to be displayed in USB mode, use Example displayed for the file. (USB mode only.) a/b to select an item and make settings to your • You can see the file name, shooting date, file size and preferences. NOTE music 1 music 2 music 3 music 4 music 5 pixel size of the selected photo in the lower-left corner Example SONG_01.MP3 3:42 SONG_02.MP3...
  • Page 35 Enjoying Photo/Music/Video Playback Buttons for playing mode USB Menu USB Menu On the menu to be displayed in USB mode, use On the menu to be displayed in USB mode, use Buttons Description a/b to select an item and make settings to your a/b to select an item and make settings to your Go to the beginning of a fi...

  • Page 36: Playing Back Files From A Portable Device Or Pc

    Enjoying Photo/Music/Video Playback USB Operation Panel/Home Network Playing Back Files from a Portable NOTE (DLNA) Operation Panel Device or PC • Reverse/fast forward continues from one file to another during continuous playback. You can use the operation panel for video playback With the remote playback function, you can use your • Use "CC" on the operation panel to change the Closed operations. portable device to play back pictures, video, and Caption display. You can also switch the Closed You can call up this operation panel from "System music on the Home Network server. Caption display by using "System Options" > "View Options" > "View Option". • This TV is a DLNA certified Digital Media Renderer. Option" > "Change CC" or by pressing CC on the Example remote control unit. (DMR) • Use "Audio" on the operation panel to change the • To use the remote playback function, your portable audio. You can also switch the audio by using "System device must be a DLNA Certified Digital Media Options" > "View Option" > "Change Audio".

  • Page 37: Other Viewing Options

    JERROLD 02, 03, 10, 11, 12, 20, PHILIPS 26, 38 25-34 PIONEER 30, 33, 35 INSTANT REOLYA MAGNAVOX 04, 05, 08, 12, 15, 16, PROSCAN JC PENNEY 18, 19, 22, 23 25, 39 09, 16, 17, 22 MOTOROLA SAMSUNG 29, 34 KENWOOD OKA SIGMA SHARP 23, 32, 41, 42 MAGNAVOX 04, 05, 06 PANASONIC 14, 21 SONY 27, 40 MAGNIN PHILIPS 04, 05, 08, 13, 15, 16, TOSHIBA MEMOREX 18, 19, 22, 23 YAMAHA MONTGOMERY WARD PIONEER ZENITH RANDTEK 04, 05...

  • Page 38: Operating The Connected Equipment

    Using AQUOS LINK Other Viewing Options 1 POWER (SOURCE) Operating the Connected Equipment Controlling HDMI Equipment Using AQUOS LINK • Turns the connected equipment power on and off. To operate the connected equipment, press STB, 2 I What’s AQUOS LINK? • Starts playback. (VCR, BD, DVD) DVD•VCR or AUDIO to select your device. (STB • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate (cable/satellite set-top box), BD, DVD, VCR or compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). 3 G • By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AUDIO.) The remote control unit button will function • Rewinds the tape and allows picture search. (VCR) AV amplifier using the remote control of the TV. • Hold down to go in reverse. (BD, DVD) as follows. • AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control. 4 H • When you operate VCR, DVD or BD, press INPUT • Stops the tape transport. (VCR)

  • Page 39: Link Operation Menu

    Using AQUOS LINK AQUOS LINK Setup Audio Return Channel One Touch Recording Link Operation Menu This function allows you to listen to the TV audio via Make the settings to use AQUOS LINK. Set the This function allows easy one-touch recording of the audio equipment without using an optical fiber cable, Menu Menu settings with "System Options" > "AQUOS LINK program being viewed on the TV to AQUOS LINK- Link Link Operation Operation which conventionally is required. Setup". For operating the on-screen display menu, compatible equipment with a recording function by Requirements for using an ARC-compatible AV Link Operation Link Operation see page 20.

  • Page 40: Using A Smartphone With The Tv

    Using AQUOS LINK Device Operation Panel Link Booking (Rec. Book) Using a Smartphone with the TV You can call up the AQUOS LINK-compatible You can use the device operation panel to control This function enables you to connect the TV to a smartphone that supports Mobile High-Definition Link recorder's EPG and preset timer recordings using playback operations. (MHL ) using an MHL cable. the TV's remote control. Press a/b/c/d to select the desired operation. To connect the TV to your MHL-compatible smartphone, be sure to use an MHL cable (commercially Select the program on the recorder's EPG. available). NOTE • You can use a/b/c/d, ENTER, RETURN, EXIT • You can view pictures and video on a large screen. and the colored buttons. • This function works only when AQUOS LINK- • You can play back music files. compatible equipment with the Device Operation Panel NOTE function is connected. • This function works only when an AQUOS LINK- Play from Rec. List compatible recorder is connected.

  • Page 41: Using A Pc

    Using a PC Communication Conditions for RS-232C Adjusting the PC Image Setting Audio Input Control of the TV Set the RS-232C communication settings on the PC You can adjust the position of the image input from • The TV can be controlled from a PC, control panels Audio Select to match the TV's communication conditions. and other devices using the RS-232C or IP. a PC the settings with "System Options" > "Terminal The TV's communication settings are as follows: This function sets the terminal to output the computer • Use a cross-type RS-232C cable, ETHERNET Setting" > "PC input". cable (commercially available) or wireless LAN for Baud rate: audio. 9,600 bps the connections. Auto Sync. (for Analog PC Input Mode Only) The adjustment items vary depending on the input Data length: 8 bits...

  • Page 42: Pc Compatibility Chart

    Using a PC ■ Command table CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS • Commands not indicated here are not guaranteed to operate. SOFTWARE VERSION S W V N 1 The current version of the TV software is displayed. CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS IP PROTOCOL P P V The currently supported version of IP protocol is VERSION displayed. POWER ON COMMAND R S P W 0 _ Off The Power On command rejected. SETTING REMOTE CONTROL R C K Y _ 0-9: 0-9, 10: DOT, 11: ENT, 12: POWER,...

  • Page 43: Using The Internet

    Using the Internet By connecting your TV to a broadband system, you can access the Internet from the TV. ■ Wireless Setup Internet Setup • You can enjoy a variety of streaming content and Internet applications. (See page 44.) Make adjustments and confirm the settings necessary for wireless LAN connection (such as Perform the procedure below to make adjustments Connecting to the Internet search for the access point and registration of it). or to confirm the settings for accessing the Internet. WPS push button: Allows the TV to automatically Press MENU to display the MENU screen, and establish the connection using a button on the • To connect your TV to the Internet, you must have a broadband Internet connection. then press ENTER. access point. • If you do not have a broadband Internet connection, consult the store where you purchased your TV or ask Press c/d to select "Initial Setup", and then WPS PIN code: Sets up the connection by your Internet service provider or telephone company. press ENTER. registering a PIN code for the access point. • When an Internet connection is made, an Ethernet and wireless connection cannot be used at the same Selecting wireless network: Searches for and Press a/b to select "Internet Setup", and then time. Use only one of the connection types.

  • Page 44: Entering Text (Software Keyboard)

    Using the Internet ■ IP Setup Entering Text (Software Keyboard) NOTE You can make adjustments manually for the IP. • If you have failed to connect to the Internet in the • Check that numbers are displayed for each setting. When you are editing an input screen or specifying the Network settings used for accessing the Internet, enter above operation, then an error message will appear. • If there are any settings without numbers, specify the text from the software keyboard. In this case, press EXIT to exit from the connected TV numbers by following the on-screen instructions. feature to make changes to the network settings. • Input the IP address by using remote control buttons NOTE • If you still cannot connect to the Internet, please 0-9. consult your Internet service provider or telephone • You can enter up to 128 characters for text. Example company. • Some special characters or diacritics may not be available depending on where you enter the text. • When an application is used, you cannot make settings Setting IP information The text you enter is displayed as you type it in. for "Internet Setup". [Current Setup] To move the cursor (the current input position), use " " or " " on the software keyboard.

  • Page 45: Using The Browser

    FAV APP1, 2, 3 (TV+Web) are enclosed in a frame. Switches between virtual mouse and • You can change the screen display method when • You can jump from a "link" to the corresponding spatial navigation modes. Switching a Web browser application is assigned to the link destination. modes also switches the display. FAV APP buttons. Each time a FAV APP button Depending on the page displayed, assigned to a browser application is pressed while switching this function may make it DISCLAIMERS a browser is open, the screen switches between easier to use the browser. SHARP corporation bears no responsibility Web-site only screen and TV+Web screen. regarding the content and quality of the content Opens a search window below the ENTER, a/b/c/d provided by the content serve provider. toolbar. You can use this to search • Press a/b/c/d to select a link that you want to for a word within the displayed jump, and then press ENTER. page. CAUTION EXIT Displays the home page. You can • If the power is cut due to a power failure or the TV • Press the button to return to the TV screen.

  • Page 46: Using Keyboard And Mouse

    Using the Internet Browser Settings ■ Move the Icons Using Keyboard and Mouse Using Applications via the Internet You can move the icons of the more commonly used You can check or modify your browser settings from You can use a keyboard or mouse for operating the By connecting the TV to the Internet, you can enjoy applications closer to the left. the Browser menu. TV while using the browser. a variety of broadband content, including videos, Press c/d to move the icon to the desired location. Press D to display the toolbar. • When you use the USB devices, connect the music and photos. ■ Delete an Application Press c/d to select " " in the toolbar, and device to the USB terminal on the TV. Select "Delete App" to delete the icon. then press ENTER. Please check that the most current software is NOTE loaded on TV by selecting "Auto Update Setting"...

  • Page 47: Disclaimers

    Using the Internet When you access the Internet application for the first time, the following appears. • This message is available only in English. DISCLAIMERS • This SHARP device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider. SHARP shall not be liable to you or any third party for your failure to abide by such authorization or terms of use. Unless otherwise specifically authorized by the applicable content or service provider, all third party content and services provided are for personal and non-commercial use; you may not modify, copy, distribute, transmit, display, perform, reproduce, upload, publish, license, create derivative works from, transfer or sell in any manner or medium any content or services available via this device. • SHARP is not responsible, nor liable, for customer service-related issues related to the third party content or services. Any questions, comments or service-related inquiries relating to the third party content or service should be made directly to the applicable content or service provider. You may not be able to access content or services from the device for a variety of reasons which may be unrelated to the device itself, including, but not limited to, power failure, other Internet connection, or failure to configure your device properly. SHARP, its directors, officers, employees, agents, contractors and affiliates shall not be liable to you or any third party with respect to such failures or maintenance outages, regardless of cause or whether or not it could have been avoided. • ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU ON AN "AS-IS" AND "AS AVAILABLE" BASIS AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY OR REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTIES OF SUITABILITY, AVAILABILITY, ACCURACY, COMPLETENESS, SECURITY, TITLE, USEFULNESS, LACK OF NEGLIGENCE OR ERROR-FREE OR UNINTERRUPTED OPERATION OR USE OF THE CONTENT OR SERVICES PROVIDED TO YOU OR THAT THE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR EXPECTATIONS. • SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF THIRD PARTY CONTENT OR SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT OR SERVICE RELATED TO SUCH THIRD PARTY PROVIDERS. • IN NO EVENT WILL SHARP AND/OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR OTHER DAMAGES, WHETHER THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT, NEGLIGENCE, BREACH OF WARRANTY, STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/ OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Examples of Application Logos...

  • Page 48: Appendix

    (600 - 400) • Standard screw Setting the TV on the Wall • Quantity The wall mount kit (sold separately) allows you to mount the TV on the wall. *1 Must be smaller than the shaded area. For detailed information on installing the wall mount, see the instructions provided with the product. *2 Use 1.25 pitch screws. We recommend you to contact a technician for assistance when installing it. SHARP is not responsible for any damage to the product or injury to yourself or others if you elect to install NOTE the wall mount on your own. • Do not mount the TV at a tilt. • To use this TV mounted on a wall, remove the cable tie as needed. CAUTION • Do not use screws that do not comply with the VESA standard screw specifications. • Install your wall mount on a solid wall perpendicular to the floor. • Do not use screws that are longer than the standard length. Screws that are too long may cause damage to When you want to attach the wall mount to surfaces other than plaster board, please contact your the inside of the TV.

  • Page 49: Troubleshooting

    Appendix Troubleshooting Problem Possible Solution • No sound • Is connection to other components correct? Pages 11 to 13 and 36 Problem Possible Solution • Is the volume too low? Page 16 • Is "Variable" selected in "Output Select"? Page 25 • No power • Check if you pressed POWER on the remote control unit. Page 14 • Have you pressed MUTE on the remote control unit? Page 16 • Is the AC cord disconnected? Page 7 • Check the audio output of the connected external equipment. Is the volume too low or • Has the power been turned on? Page 14 muted? • When external equipment is connected via an HDMI cable, you may need to configure • Unit cannot be • External influences such as lightning, static electricity, may cause improper operation.

  • Page 50: Information On The Software License For This Product

    Appendix Information on the Software License for This Product Software License You can read the software licenses in the on-screen display menu. Refer to "Information" > "Software License". ■ Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. Cautions regarding use in high and low temperature environments • When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. • Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the front panel to malfunction. Storage temperature: f4°F to e140°F (f20°C to e60°C) CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. Select an item from the list below to display the secret number input screen. (For operating the on- screen display menu, see page 20.) • "Color system" ( "Terminal Setting"...

  • Page 51: Specifications Tv

    Specifications Wireless LAN This TV has received the following certifications. Item Model: LC-80LE642U ® - Wi-Fi CERTIFIED™ (certification program from the Wi-Fi Alliance ® - Wi-Fi Protected Setup™ (certification program from the Wi-Fi Alliance Size 80o Class (80o Diagonal) LCD panel Resolution 2,073,600 pixels (1,920 g 1,080) TV-standard (CCIR) American TV Standard ATSC/NTSC System This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: VHF/UHF VHF 2-13ch, UHF 14-69ch (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party CATV 1-135ch (non-scrambled channel only) responsible for compliance could void the user’s authority to operate the equipment. To comply with the FCC RF Receiving Digital Terrestrial 2-69ch exposure compliance requirements, this device and its antenna must not be co-located or operated in conjunction Function Channel Broadcast (8VSB) with any other antenna or transmitter. Digital cable*1 The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co- 1-135ch (non-scrambled channel only) (64/256 QAM) channel mobile satellite systems;...

  • Page 52: Trademarks

    LC logo mark are registered trademarks of SHARP Corporation. This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. However, other fonts are used for some screen pages, too.

  • Page 53: Calling For Service

    THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO. Model Specific Section Your Product Model Number & Description: LC-80LE642U LCD Color Television (Be sure to have this information available when you need service for your Product.) Warranty Period for this Product: One (1) year parts and labor from the date of purchase. Additional Exclusions from...
  • Page 54 NOTE...

  • Page 55: Dimensional Drawings

    Dimensional Drawings Unit: inch (mm) (63)* Unité: pouce (mm) (89) Unidad: pulgada (mm) (1862) (99)* (1771.20)* (179) (737) (434) (600) (421) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses...

  • Page 56: Sharp Corporation

    SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in Mexico Imprimé au Mexique Impreso en México TINS-F954WJZZ 13P06-MX-ND...

Table of Contents