MOTORCYCLE TELEMATIC ALARM
A
CONTROL UNIT
D
TELEMATIC
CONTROL UNIT
ALARM CONTROL UNIT: TECHNICAL SPECIFICATIONS
Power supply: ...............................................................................................................12Vdc (10V-15V)
Working temperature: ...........................................................................between -25°C and +85°C
Protection rating: .............................................................................................................................. IP 65
Application classifi cation: .................................................................................................motorcycle
TELEMATIC CONTROL UNIT: TECHNICAL SPECIFICATIONS
Power supply: ..............................................................................................................12Vdc (10V-24V)
Working temperature: ......................................................................... between -30°C and +80°C;
Protection rating: ............................................................................................................................. IP 65
Application classifi cation: .................................................................................................motorcycle
• ALL INSTALLATION OPERATIONS MUST BE CARRIED OUT WITH THE ENGINE OFF.
• Before starting installation, carefully asses the position of the device, according to the available space, to the length
of the power cables, and to the horizontal position that it needs to maintain.
• The product needs to be installed in an area that is only accessible to the service staff (Service Access Area On).
• Carefully follow the steps outlined in this manual.
• Installation staff are not authorised to remove warranty seals and/or access the inside of the product and accesso-
ries.
• The staff in charge of the installation is not authorised to alter and/or adapt the product and its relative accessories.
• The manufacturer assumes no responsibility for damages caused to property and/or people, caused by the in-
correct installation of the product.
• ATTENTION: Risk of explosion if the internal batteries are replaced with non-equivalent models, other than those
contained in the product.
INSTALLATION MANUAL
T.30 - Def-Com 30
KIT COMPOSITION
B
ALARM
E
ALARM
ACCESSORY BAG
C
ALARM
WIRING
F
TELEMATIC
ACCESSORY BAG
WARNINGS
CONNECTION
HARNESS
G
DETERGENT
WIPE
EN
Need help?
Do you have a question about the T.30-Def-Com 30 and is the answer not in the manual?
Questions and answers