Dell Edge Gateway 3002 Installation And Operation Manual page 8

Features
2 Power or ignition port
3 Power and System status light
4 WLAN or Bluetooth status light Indicates if WLAN or Bluetooth is ON or OFF.
5 Cloud-connection status light
6 Ethernet port one (with Power
over Ethernet support)
1
7 USB 3.0 port
8 SIM card slot (optional)
9 SD card slot (optional)
10 Quick Resource Locator label
11 micro-SIM or micro-SD card
access door
1
USB power is limited to 0.6 A/3 W.
Table 4. Status-light indicators
Function
System
8
NOTE: An intrusion event is triggered by a third-party enclosure to the Edge
Gateway through a sensor. The sensor should have a cable that is compatible
with the intrusion switch connector on the Edge Gateway.
Connect a 12-57 VDC (1.08-0.23 A) power cable to supply power to the Edge
Gateway.
NOTE: Power cable is sold separately.
NOTE: For marine applications, limit input voltage to 12-48 VDC. The cable
length for rail applications must not exceed 30 meters.
Indicates the power status and system status.
Indicates the cloud connection status.
Connect an Ethernet (RJ45) cable to gain network access. Provides data transfer
speeds up to 10/100 Mbps and supports Alternative A of the IEEE 802.3af standard.
NOTE: The Edge Gateway is an IEEE 802.3af Alternative A compliant
Powered Device (PD).
NOTE: To comply with EU Declaration of Conformity (DoC), ensure cable
length from the system to the device does not exceed 30 meters.
NOTE: To comply with regulatory requirements in Brazil, ensure cable length
from the system to the device does not exceed 10 meters.
Connect a USB enabled device. Provides data transfer speeds up to 5 Gbps.
Insert a micro-SIM card into the slot.
Insert a micro-SD card into the slot.
NOTE: Remove the SD card slot filler before inserting a micro-SD card.
Scan with a QR reader to access documentation and other system information.
Open the access door to access the micro-SIM or micro-SD card.
Indicator
Power status and
System status
Color
Green or Amber
Control
BIOS
Status
Off: System off
On (Solid Green):
System on or Boot
successful
On (Solid Amber):
Power up or boot fail
Blinking Amber: Fault or
error