Download Print this page
Firefly OL1786TBL Instruction Manual

Firefly OL1786TBL Instruction Manual

Electric patio heater

Advertisement

Quick Links

Instruction Manual
Electric Patio Heater
OL1786TBL - OL1786SET2
IMPORTANT INSTRUCTIONS
Only use the halogen heater on a firm solid horizontal area where all the feet on
the base are in contact with the floor. (Should the heater be tilted or fall over the
auto cut off switch will activate)
1. Site the heater outside or in a large open area and well away from any
obstructions such as branches or where the heater is near any objects
that can be effected by heat, such as furniture, curtains or other
inflammable objects (minimum distance 1 metre).
2. Do not use in unventilated areas.
3. Do not use where gas, petrol, paint or other inflammable goods are
stored.
4. Do not push any items through, obstruct or cover the grill of the heater
head.
5. Do not leave turned on and unattended especially when children and or
animals are in the vicinity.
6. The indication of the different positions of switches shall be visible from a
distance of 1M.
7. The Marking concerning covering shall be visible after the heater has
been installed. It shall not be placed on the back of portable heaters.
8. The unit must be securely placed on a horizontal and flat surface.
9. The unit is at high temperature during operation. It keeps hot for a period
after shut down. Potential danger would occur when touching it during
this period.
10. Don't place the unit closed to curtain and/or other flammable objects.
Otherwise there will be a danger of catching fire.
11. Don't cover the unit with anything during operation or a short time after
it's shut down.
12. Don't wrap the power supply cord on the unit.
13. The unit must be handled with care, and avoid vibration or hitting.

Advertisement

loading
Need help?

Need help?

Do you have a question about the OL1786TBL and is the answer not in the manual?

Questions and answers

Summary of Contents for Firefly OL1786TBL

  • Page 1 5. Do not leave turned on and unattended especially when children and or animals are in the vicinity. OL1786TBL - OL1786SET2 6. The indication of the different positions of switches shall be visible from a distance of 1M. 7. The Marking concerning covering shall be visible after the heater has been installed.
  • Page 2 14. The unit must be securely grounded during operation. 27. The unit must not be positioned under a socket. 15. When assembling, keep clear from any board or flammable material. 28. When the power supply cord is damaged, it must be replaced by 16.
  • Page 3 Step 5: Place the power cord plug through base, bottom pole, middle pole, Connect Assembling Process the power cord plug to the socket in the heater head. Step 1: Fix the Bottom Pole to the base using 3pcs M6*50 bolts. Step 6: Feed the power cord plug through the middle pole, push the heater head onto upper pole and secure using M4*8 screws.
  • Page 4 Step 8 : Fix the Table on the Pole by screwing the plastic fixation Part. Step 11: Secure the power cord to the weighted base. Attach the power cord on the stainless steel base with four M4 x 12 screws. Step 9: Tighten the Plastic Fixation Part by screwing the Screw Knob.
  • Page 5 STORAGE Operation If the heater will not be used for a long period of time, store it in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original Connect the power cable to a 13 amp supply that is located in a safe, dry area. packaging to repack the unit.

This manual is also suitable for:

Ol1786set2