Firefly OL2800 Instruction Manual

Electric

Download this manual

Enlarged version

Unpack the halogen heater making sure that all the items are

present and that there are no components left in the box and that

the heater head is free from any packing material.

Using the detailed drawing follow the steps to assemble your

halogen heater.

Do not connect the halogen heater to the electrical supply until all

the assembly is complete.

Instruction Manual

Do not connect the halogen heater to the electrical supply if any of

the components or the power cord is damaged in any way.

Electric Patio Heater

If in doubt contact:

OL2800

Primrose London

Info@primrose.co.uk

9035210(UK)

Tel:0118

118 9035210(outside of UK)

Tel:0044

Please read these instructions carefully before using

your new halogen heater

Need help?

Do you have a question about the OL2800 and is the answer not in the manual?

Page 1 Instruction Manual Do not connect the halogen heater to the electrical supply if any of the components or the power cord is damaged in any way. Electric Patio Heater If in doubt contact: OL2800 Primrose London Info@primrose.co.uk 9035210(UK) Tel:0118 118 9035210(outside of UK)
Page 2  Never use the heater in particularly dusty and explosive areas. Installation to Wall Warning  These appliances must be earthed.  Before installing or replacing the bulb, the appliance must be always being disconnected from the 230V supply.  The appliance must be disconnected from the 230V supply before the lid is opened.
Page 3 any obstructions such as branches or where the heater is near any objects that can be affected by heat, such as furniture, curtains or Assembling other inflammable objects (minimum distance 1 meter). 2. Do not use near bath tubs, wash areas or swimming pools. 3.
Page 4: Operation
18. Don’t wrap the power supply cord on the unit. or instruction concerning use of the appliance by a person 19. The unit must be handled with care, and avoid vibration or hitting. responsible for their safety. 20. The unit must be securely grounded during operation. 38.
Page 5 light setting; the 0 position is off. • The Remote control is also used to control the heat and light settings. (I) for heat setting 1500W, (II) for light setting; the 0 position is off. • Fix the knob can adjust the angle, degree range 30°...