Evaluate Plant And Set - Siemens Albatros2 Technical Manual

6

Evaluate plant and set

Operate hot water
6 Evaluate plant and set
Basic navigation
56
Siemens
Building Technologies
"Evaluate plant and set" is done in the end-user or expert view.
End-user view
The information and settings are the same in both views, with the exception of
special functions that are still based on the user level.
You can conduct the following operating steps on one room unit QAA74 or one
operator unit AVS74, but with fewer or even no special functions available on the
room unit.
Basic navigation on the navigation bar and work area for the following menus is
described in Section "Operation [➙ 36]", section "Navigate and set with the control
knob".
Graphical User Interface UI400
Expert view (here: User levels 3=OEM)
CE1U2348en
2014-06-03