Power Light; Generating Power Light; Immersion Power Light - EarthWise SOLiC 200 User Instructions

Power light

Green The mains quality is good. Power is on
Red The mains quality is poor, so the unit is in temporary
standby mode. This light is also used to highlight
faults or other undesirable conditions, such as
power limiting from overheating, sensor not
calibrated or system in standby.

Generating power light

Mode 1 Green
Mode 1 Red
Mode 2 Green
Mode 2 Red
Mode 2 Flashing
red/
green

Immersion power light

Green
Off
Flashing red
Flashing green
The solar PV installation is generating
power.
The solar PV installation is not
generating power.
Sufficient surplus power is available to
be supplied to the immersion heater.
The house is drawing grid power - there
is minimal or no surplus power
available.
All available power is being supplied to
the immersion heater. No power is
being drawn from the grid.
Power is being supplied to the immersion
heater - presently fading up or down.
No power is being provided
The immersion heater has been provided
with full power irrespective of any power
being generated.
The pause function has suspended heating
altogether.