Tips For Temperature Reading Time Period; Activate "M" After Temperature Measurement - Valley Electronics Lady-Comp Instructions Manual

Tips for taking your temperature
Lady-Comp wakes you up with the alarm. Press the key to turn the
alarm off. To take your temperature, press the key again. The "thermom­
eter" symbol is blinking; Lady-Comp is ready to take your temperature.
– Now place the sensor under your tongue and close your mouth.
– It will take about 60 seconds to take your temperature. If no temperature
can be taken after 3 minutes the process is automatically terminated.
Good to know:
Temperature reading time period
The temperature reading time limit is the time during which you
can perform the daily temperature measurement. Lady-Comp moni­
tors the daily temperature measuring time period. The temperature
measuring time period is generally independent of the alarm and is

Tips for temperature reading time period:

– You can identify the reading time period from the illuminated thermometer symbol on the home screen.
– During the temperature reading time period, pressing any key will start a temperature reading.
– We recommend that you allow Lady-Comp to wake you up.
– If you wake up during the temperature reading time period, i.e. to look after your child, take your
temperature.
– If you wake up after the temperature reading time period then don't take your temperature.
– You may reset the temperature reading time period at any point by changing the alarm time (i.e. on
weekends or for shift work).
If your temperature is not taken over a three-day period, then the temperature reading time period is cleared, and the temperature can be
taken the next day only by activating the alarm. The temperature measuring time period will then be set by the alarm time (+/- 3 hours).
14
– The display will show temperature reading values between 34.5 to
41.0 degrees Celsius or 94.20 to 105.00 degrees Fahrenheit.
– If your temperature value is above 37.8 �C or 99.9 �F, the tempera­ If your temperature value is above 37.8 �C or 99.9 �F, the tempera­
ture display alternates with the letter "F" for fever.
– When finishing the temperature reading, you hear a signal tone and
the ascertained temperature reading value appears on the display.
Your fertility is displayed for that day.
calculated from the time you took your temperature previously (+/­ 3
hours). The temperature measuring time period comprises 6 hours
and begins and ends three hours before and after the last tempera­
ture measuring time if this is different from the alarm time.

Activate "M" after temperature measurement

If "M" is expected,
"Return" illuminated "Return" illuminated
"M" will blink
"M" Yes
"M" Display Yes
"M" Display No
"M" No
After taking your temperature, it is possible that the "M" for menstruation
will blink.
– To confirm "M" press the key up for Yes.
– To not confirm "M" press the key down for No.
Once Lady-Comp knows your cycle, the device will ask you about "M" on
the days that menstruation is expected.
– It begins to ask ("M" blinking) two days before menstruation is expected.
– When "M" is done, Lady-Comp will stop asking for "M".
Important:
Please confirm "M" on at least three consecutive days.
If you have "M" without being asked by the device,
activate "M" as described. If you have accidentally
entered "M", you may return to "M" to edit it for the
past three days.
15