Rear Brakes - Suzuki SWIFT RS415 2017 Service Manual

4C-1 Rear Brakes:

Rear Brakes

Rear Drum Brake Components
1. Rear brake drum
2. Spindle
3. Spindle nut
4. Spindle cap
5. Brake shoe
6. Parking brake shoe lever
7. Push nut
8. Brake strut
Rear Brake Drum Removal and Installation
Removal
1) Hoist vehicle and remove wheel.
2) Remove spindle cap (1) as shown (by hammering
lightly at 3 locations around it so as not to deform or
cause damage to seating part of brake drum).
Repair Instructions
9. Quadrant spring
10. Shoe return spring
11. Antirattle spring
12. Shoe hold down spring
13. Shoe hold down pin
14. Wheel cylinder
: Apply brake fluid to piston cup.
15. Rear bleeder plug
16. Bleeder plug cap
3) Uncaulk spindle nut and remove spindle nut (1).
S4RS0A4306002
4) Release parking brake lever.
5) Pull rear brake drum (1) off by using special tools.
Special tool
(A): 09943–17912
I4RS0A430002-
(B): 09942–15511
S4RS0A4306001
I4RS0A430001-
17. Brake back plate
18. Spindle bolt
: 175 N m (17.5 kg-m, 126.5 lb-ft)
: 7.5 N m (0.75 kg-m, 6.0 lb-ft)
: 73 N m (7.3 kg-m, 53.0 lb-ft)
: Do not reuse.
I4RS0A430003-