Upgrade - Satlink WS-6926 User Manual

THE PROFESSIONAL EQUIPMENT------------------|USER'S MANUAL|
Example:
1.If you want to update main code, please select the main
code file like BT_CP09_V1_39_SA~N.img, the size of
file is about a few Mbytes, then select upgrade app code.
2.If you want to update user database, please select the us-
erdb file like userdb. img, the size of file is 256kbytes, then
select upgrade user db
3.If you want to update default database, please select the
default file like asia. img, the size of file is128kbytes, then
select upgrade default db.
Warning: while updating meter software data, should not
power off and must wait for finish write data.
3.4 System Setting
This menu consists of sub-menus shownas below:
17-Digital Satellite Meter
THE PROFESSIONAL EQUIPMENT------------------|USER'S MANUAL|
3.4.1Language:Press ◄►key to select language.
3.4.2Screen format: Press ◄► key to select Screen format:
4:3PS/4:3LB/16:9PS/16:9LB.
3.4.3Factory reset :The factory default allows user to res-
tore the factory reset values, when you press OK key, the
Warning window will appear, if you select yes, the system
setup will be reset to the default values.
Warning: On selecting factory default you will lost all of
data and information, which was previous installed.
3.4.4Longitude & Latitude;Location &Hemisphere
Input the value by using the numeric; the value must be no-
thigherthan180.
If the location longitude A is higher than 180, the valuewill be
(360-A),then press ◄► key to change location/Hemisphere
Exp:
Local longitude is East 200.
You should input west (360-200)=160
3.4.5 Time Zone:Press ◄►key to set Time Zone.
3.4.6Channel reset:Press OK key to Restore defaultChannel
setting
Digital Satellite Meter-18