Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Satlink WS-6933
Summary of Contents for Satlink WS-6933
- Page 1 Satellite locator WS-6933 User's Manual...
-
Page 2: Table Of Contents
English CONTENTS 1. GUIDE ......................2 1.1 IMPORTANT SAFETY INSTRUCTIONS ..................2 1.2 UNPACKING ..........................2 1.3 PRODUCT OVERVIEW&ILLUSTRATION ................3 2. OUTLINE ......................4 THE MENU OSD INSTRUCTION ..............5 3.1 SAT SETTING ..........................5 3.2 SIGNAL SCAN ..........................6 3.3 TOOLS .............................6 3.4 SAT MANAGER ..........................7 3.5 TP MANAGER ..........................7 3.6 SYSTEM SETUP ..........................7 4. -
Page 3: Guide
1. GUIDE 1.1 IMPORTANT SAFETY INSTRUCTIONS Thank you for choosing our product. Before installation, we would like to re- mind you some notes, which is very important for operating safely and prop- erly, as follows: • Be sure to read this user manual before starting your operation. • You must install the dish with correct direction and angle. -
Page 4: Product Overview&Illustration
English 1.3 PRODUCT OVERVIEW&ILLUSTRATION Description FUNCTION Power Switch Turn on/off meter LNB IN Connect to satellite antenna cable LCD Screen Video display USB Port Connect to PC DC Slot Connect to Adaptor Input Digital tube Quality shows Power Power indicator light 22KHZ 22Khz indicator light Verticalpolarization voltage output light... -
Page 5: Outline
2. OUTLINE • Digital meter for signal strength and quality • Sound and Light Alarm for Locking Signal • Auto Calculate Angle of AZ ,EL • Supports DISEQC 1.0/1.1 ,0/22khz Tone • Beep Integrated • LNB short protect • 7.4V/800mAh Li-Ion Battery Included • Software upgrade via USB port • Easy to carry... -
Page 6: The Menu Osd Instruction
English THE MENU OSD INSTRUCTION If you have installed and connected the cables of the meter,open the power switch, into the main menu. • Sat Setting • Signal Find • Tools • SAT Manager • TP Manager • System Setup Press YZ key to move the cursor up or down in the menu interface, then use to confirm a selection. -
Page 7: Signal Scan
• DisEqc type & Input: If we select diseqc1.0/1.1, we can press A B key to set the port number. If select Unicable, we can press A B key to select IF Chan- nel, and use YZ key to input Center Frequency. • LNB Power: press AB key to switch LNB power on /off. -
Page 8: Sat Manager
English 3.4 SAT MANAGER • Add Satellite • Edit Satellite • Delete Satellite Add Satellite: the setting refer to Antenna Setup. Edit Satellite: press AB key to page up /down; then press YZ key to select the satellite; press to edit satellite setting, refer to Antenna Setup. Delete Satellite: refer to Edit Satellite then press to delete satellite. -
Page 9: Technical Specification
4. TECHNICAL SPECIFICATION TRANSMISSION STANDARDS DVB-S/S2 SATELLITE INPUT/DEMODULATION Connector Type F Type Input Frequency 950 to 2150 MHz Signal Input Level - 65 to -25 dBm Band Switch Control 22KHz LNB Supply 13V/18V, IMax300mA Demodulation Type QPSK /8PSK /16APSK Symbol Rate 2<Rs<45Mband(SCPC/MCPC) LCD FEATURES LCD Type...
Need help?
Do you have a question about the WS-6933 and is the answer not in the manual?
Questions and answers