Table of Contents
Advertisement
13. Permanently Disable Alarm / Discharge Battery
WArnIng: fAIlUre to dISChArge AlArM bAttery AS InStrUCted PrIor to
dISPoSAl MAy CreAte PotentIAl for lIthIUM bAttery relAted fIre or hAzArd.
WArnIng: dISChArgIng the AlArM bAttery IS PerMAnent
•
Once the alarm battery has been discharged, it cannot be reactivated!
•
Once discharged, the alarm will NO LONGER DETECT SMOKE OR CO.
•
Once the alarm battery is discharged, the battery is depleted and the alarm will no longer function.
•
Once the alarm battery has been discharged, the alarm cannot be mounted onto the mounting plate or reactivated.
Figures 13-A (top) and 13-B (bottom)
to Permanently disable Alarm / discharge battery:
•
Rotate the alarm counterclockwise to remove it from the mounting plate.
•
Push in the dashed area with a screwdriver to break tab (Figure 13-A).
•
After the tab is broken, use the screwdriver to turn the red slotted arrow to
the "Permanently Disable Alarm / Discharge Battery" location. This will dis-
able the alarm, stop the low battery or end of unit life "chirps" and render
the alarm safe for disposal by draining the battery (Figure 13-B).
25
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the P4010DCSCO-W and is the answer not in the manual?
Questions and answers
Why does my unit one beep…silence about 5-10 minutes…beep..quiet for hours….press button…says temporary silent….hours later…beep once again etc.
The Kidde P4010DCSCO-W beeps intermittently every 30 seconds and announces "Connection lost, press button to temporarily silence" because it has lost connection. This indicates a communication issue within the wireless alarm network. Pressing the button temporarily silences the alert, but the issue should be resolved by checking the alarm’s network connection and re-establishing communication.
This answer is automatically generated
@Mr. Anderson have no idea how to check alarms network? Senior..cataracts…need explanation please