Before Using For The First Time - Miele B 3312 Operating Instructions Manual

Before using for the first time

 Before using the steam ironing
system for the first time, remove all
packaging (e.g. the protective film
from the tower).
Determining water hardness
In order for the steam ironing system to
function properly and to display a
message prompting you to descale it at
the correct time, it is important to set
the steam ironing system to the
hardness of your local water supply.
The water hardness level indicates
how much calcium is dissolved in the
water. The higher the calcium content,
the harder the water, and the harder
the water, the more often the steam
ironing system will need to be
descaled.
Your local water supplier can inform you
of the water hardness level in your area.
This information can also be found
online on the website of the water
supply company.
As an alternative, you can also
determine the approximate water
hardness by using the test strips
supplied.
24
Using the test strips
 Dip the test strip in the water for
approx. 1 second.
 Remove the test strip from the water
and shake the water off the test strip.
After approx. 1 minute, and based on
the colouration, you will be able to read
the water hardness from the table
below:
Test strips
4 green zones
1 red zone
2 red zones
3 red zones
4 red zones
Useful tip: It is useful to know your
water hardness so that you can provide
the service technician with this
information in the event of any service
calls. Please note your water hardness
level here: .................................. mmol/l
Water hardness
< 0.5 mmol/l
> 0.7 mmol/l
> 1.3 mmol/l
> 2.5 mmol/l
> 3.8 mmol/l