Changing The Filter - Jura S8 Instructions For Use Manual

Changing the filter

T Remove and empty the water tank.
T Fit the filter cartridge extension supplied on top of a CLARIS
Smart filter cartridge.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
'Saved' appears briefly on the display.
'Filter is being
Rinsing of the filter stops automatically.
'Empty drip tray'
T Empty the drip tray and coffee grounds container and put
them back into the machine.
The start screen is displayed.
E If the filter is active, this is indicated by a blue filter symbol at
the top of the display.
E Once the filter cartridge stops working (depending on the
water hardness setting), the S8/S80 will prompt you to change
the filter.
E CLARIS Smart filter cartridges are available from specialised
dealers.
Precondition: The start screen is displayed.
played.
T Touch 'Change the
T Touch 'Change the filter'
'Change filter'
T Remove and empty the water tank.
T Turn the filter cartridge anticlockwise and remove it along
with the extension from the water tank.
T Fit the filter cartridge extension on top of a new CLARIS
Smart filter cartridge.
rinsed', water flows directly into the drip tray.
'Change the filter'
filter'.
again.
5 Maintenance
is dis-
35