Moving A Program: Allocating Program Selection Buttons - Miele PG 8504 Operating Instructions Manual

Additional settings
78
Moving a program: allocating program selection
buttons
You can sort the program selection list to suit your requirements and
therefore also allocate the program selection buttons ,  and
.
Additional settings
Open the

the  button and then switch it on again with the  button whilst
keeping the  button pressed in.
Open the menu as follows:

Additional settings

 Move program
All enabled programs are shown in the program list (see "Further
settings/Enabling programs"). A program's position in the program list
is the determining factor for assigning the program selection buttons.
Programs are numbered from 1 - n. The first three programs in the list
are assigned to the program selection buttons; for example:
1. Normal on program selection button 
–
2. Regular on program selection button 
–
3. Extended on program selection button 
–
4. Demineralized rinse
–
5. Rinse
–
– etc.
Use the  and  arrow buttons to select the program you would

like to move.
Confirm your selection with OK.

Now you can move this program within the list.
Use the  and  arrow buttons to move the program to the

position you want.
Press OK to save the program to the selected position.

The program which was previously saved to this position and all
subsequent programs are moved down by one position.
The process can be repeated as often as you wish.
Press the  button to exit the menu.

menu by switching the machine off with
Move program
1. Normal
2. Regular