Philips LTC 2622/90 Installation Instruction page 22

LTC 2600 Series
WALKTHROUGH: The walkthrough section of the Action Setup is used to set action zone sensitivity and target
size within the scene to provide greater accuracy in defining the target (i.e. eliminating nuisance alarms).
ACTION SETUP
SETUP 1
ACTION DWELL
ACTION LIST
ACTION ZONES
>WALKTHROUGH
DIRECTION ZONE
Choose:SELECT
• Once in the WALKTHROUGH setup, select the camera requiring setup by depressing the corresponding
camera number.
• Set the Sensitivity parameter by using the up/down arrow keys to increase/decrease the zone sensitivity.
• Program the Object Size by using the cursor keys to select the desired target size (corresponding to the
number of zone coordinates covering the target size/area—from 1x1 up to 5x5).
• Press SELECT to store the information, and press ZOOM
DIRECTION ZONES: A dual set of action areas to be programmed such that both areas must be activated in
sequence for an action alarm to occur.
• To program this feature, select the DIRECTION ZONE option from the ACTION SETUP menu.
• Press the MENU key to enable the Zone 1. Use the cursor keys to position the Zone 1 brackets in the
desired screen area.
• Repeat these steps for Zone 2.
• Press SELECT to store the information, and press ZOOM
ACTION SETUP
SETUP 1
ACTION DWELL
ACTION LIST
ACTION ZONES
WALKTHROUGH
>DIRECTION ZONE
Choose:SELECT
6. Return to the ADVANCED SETUP menu. Select the ALARM SETUP option. Depending on your multiplexer
model, up to 9 or 16 alarm inputs can be connected to the multiplexer and are associated with their
corresponding video input. Alarm inputs can be configured as normally open or normally closed. These inputs
correspond to the camera inputs so that when an alarm input is initiated, the respective camera picture is
displayed or recorded.
ADVANCED SETUP 3.00
SETUP 1
TIME/DATE
AUTOSET
VCR SETUP
ACTION SETUP
>ALARM SETUP
CAMERA TITLES
Choose:SELECT
Edit: <>
Camera 1
08 sec
^ More v
Sensitivity [Edit: v^] =MED Object Size [Edit: <>] =3x3
Camera: 1 to 16 Freeze: DEFAULT Exit: ZOOM Status: NO ACTION
Exit:ZOOM
Camera 1
08 sec
1 1 1
1 1 1
Zone [Edit: MENU]=ENABLE (1's) Move Cursor:^v
^ More v
Exit:ZOOM Camera: 1 to 16 Freeze: DEFAULT
^ More v
Exit:ZOOM
23
Section 4 Programming - Advanced Setup
to exit.
to exit.
2 2 2
2 2 2
ALARM SETUP
SETUP 1
ALARM DWELL 08 sec
ALARM LIST
ALARM INPUT
BEEPER DISABLE
Choose:SELECT More v
Edit:<> Exit:ZOOM
Exit: ZOOM