Philips LTC 2622/90 Installation Instruction page 14

LTC 2600 Series
6. From the QUICK SETUP menu, select VCR SETUP (sample menus are shown below). Then select
RECORD SETUP to specify the VCR model and time-lapse mode.
QUICK SETUP 3:00
SETUP 1
TIME/DATE
AUTOSET
>VCR SETUP
Choose:SELECT
Exit:ZOOM
7. From the RECORD SETUP menu, select the SELECT VCR option. Select the appropriate VCR model by
scrolling through the different selections listed with the TYPE parameter until you find your VCR model.
NOTE: If your VCR type is not listed in the SELECT VCR menu, refer to the ADVANCED SETUP
programming section for instructions on setting a custom VCR model.
RECORD SETUP
*VCR OUT* SETUP 1
VEXT INPUT
>SELECT VCR
TIME LAPSE
RECORD LIST
VCR OUT
Choose:SELECT
Exit:ZOOM
8. Once the VCR has been selected, press the SELECT
RECORD SETUP menu. Select TIME LAPSE from the menu. Scroll through the time-lapse speeds until you find
the appropriate recording speed of your VCR.
RECORD SETUP
*VCR OUT* SETUP 1
VEXT INPUT
SELECT VCR
>TIME LAPSE
RECORD LIST
VCR OUT
Choose:SELECT
Edit: <>
NOTE: After you specify the VCR model, the multiplexer will present the time-lapse settings available for the
selected VCR. Ensure the same setting is entered in the VCR time-lapse menu as selected on the VCR for
recording.
VCR SETUP
SETUP 1
>RECORD SETUP *VCR OUT*
PLAYBACK FORMAT LTC2600
RECORD LOCK
^ More Choose:SELECT
SELECT VCR
*VCR OUT* SETUP 1
OFF >TYPE
EDIT CUSTOM VCR
2hr SP
^ More Choose:SELECT
OFF
2hr SP
^ More
Exit:ZOOM
Section 3 Programming - Quick Setup
>VEXT INPUT
OFF
More v
Exit:ZOOM
LTC3991
More v
Exit:ZOOM
key followed by the ZOOM
TIMELAPSE
*VCR OUT* SETUP 1
Set the time lapse speed
2 hr - SP
Default:FREEZE
Save:SELECT Exit:ZOOM
15
RECORD SETUP
*VCR OUT* SETUP 1
OFF
SELECT VCR
TIME LAPSE 2hr SP
RECORD LIST
VCR OUT
Choose:SELECT More v
Edit: <> Exit:ZOOM
SELECT VCR
*VCR OUT* SETUP 1
Match VCR type with the VCR
connected to optimize
recording speeds.
LTC3991
^
Default:FREEZE Edit: ^v
Save:SELECT Exit:ZOOM
key to return to the
Edit: ^v