Approved Cleanser Active Ingredients; Harmful Ingredients; Cleaning Instructions; Special Cleaning Notes - Motorola SB1 User Manual

Smart badge
Hide thumbs Also See for SB1:
Table of Contents

Advertisement

Approved Cleanser Active Ingredients

100% of the active ingredients in any cleaner must consist of one or some combination of the following:
isopropyl alcohol, bleach/sodium hypochlorite, hydrogen peroxide or mild dish soap.

Harmful Ingredients

The following chemicals are known to damage the plastics on the SB1 and should not come in contact with the
device: ammonia solutions, compounds of amines or ammonia; acetone; ketones; ethers; aromatic and
chlorinated hydrocarbons; acqueous or alcoholic alkaline solutions; ethanolamine; toluene; trichloroethylene;
benzene; carbolic acid and TB-lysoform.

Cleaning Instructions

Do not apply liquid directly to the SB1. Dampen a soft cloth or use pre-moistened wipes. Do not wrap the
device in the cloth or wipe, but gently wipe the unit. Be careful not to let liquid pool around the display window
or other places. Allow the unit to air dry before use.

Special Cleaning Notes

Many vinyl gloves contain phthalate additives, which are often not recommended for medical use and are
known to be harmful to the housing of the SB1. The SB1 should not be handled while wearing vinyl gloves
containing phthalates, or before hands are washed to remove contaminant residue after gloves are removed. If
products containing any of the harmful ingredients listed above are used prior to handling the SB1, such as
hand sanitizer that contain ethanolamine, hands must be completely dry before handling the SB1 to prevent
damage to the plastics.

Materials Required

Alcohol wipes
Lens tissue
Cotton tipped applicators
Isopropyl alcohol
Can of compressed air with a tube.

Cleaning the SB1

Housing

Using the alcohol wipes, wipe the housing including keys and in-between keys.

Display

The display can be wiped down with the alcohol wipes, but care should be taken not to allow any pooling of
liquid around the edges of the display. Immediately dry the display with a soft, non-abrasive cloth to prevent
streaking.
Reader Exit Window
Wipe the exit window periodically with a lens tissue or other material suitable for cleaning optical material such
as eyeglasses.
Maintenance & Troubleshooting
5 - 3

Advertisement

Table of Contents
loading

Table of Contents