Battery Discharged Screen
Figure 1-6
WLAN Setup
To set up the SB1 on a wireless LAN, refer to the SB1 Integrator Guide for detailed instructions.
Resetting the SB1
If the SB1 stops responding to input, perform a reset. A reset stops all running applications and any unsaved
data is lost. Simultaneously press and hold the Home and Scan buttons for five seconds. The SB1 beeps and
then resets.
Powering Off the SB1
Power off the SB1 when not using for long periods of time.
Press the Home button.
1.
Touch
. The Settings screen appears.
2.
Touch
. The More Settings screen appears.
3.
Touch Advanced Settings. The Advanced Settings screen appears.
4.
Touch Power Off Device.
5.
Touch OK. The SB1 shuts down and the Regulatory Information screen appears.
6.
To turn the SB1 back on, press and hold the Scan and Home buttons for at least five seconds.
Getting Started
1 - 5