Panasonic KX-NCP500 Features Manual page 31

When the original destination is:
•
ICD Group
•
VM Group (DTMF/DPT)
•
DISA
*1
•
PS Ring Group
*2
•
External Pager (TAFAS)
•
Analogue/ISDN Remote Maintenance
•
Other PBX Extension (TIE with no PBX Code)
*1 Intercept Routing for DISA will redirect a call only if all of the Direct Inward System Access (DISA) ports are busy. Once the call
reaches the destination extension by using the DISA feature, the Intercept Routing feature of the extension is used.
*2 By assigning the forward destination of a Virtual PS to a PS Ring Group or external pager, and assigning Intercept Routing destinations
to the Virtual PS, calls to these destinations will be redirected to the Intercept Routing destination of the Virtual PS.
*2
1.1.1 Incoming Trunk Call Features
The Available Intercept Destination is:
The ICD Group Overflow destination assigned to the
group. (® 1.2.2.6 Overflow Feature)
® 5.13 [3-5-1] Incoming Call Distribution
Group—Group Settings—Overflow No Answer—
Time out & Manual Queue
Redirection—Destination-Day, Lunch, Break, Night
® [625] Destination for Overflow Time Expiration
The destination assigned to the first extension of the
VM group.
If all DISA ports are busy when a call is made using
DISA, one of the following can be selected through
system programming:
•
Disable: Busy tone is sent to the caller. When
using an analogue trunk, a ringback tone is sent.
•
Operator: The call will be redirected to the
operator.
•
AA-0, AA-9: The call will be redirected to the
destination assigned to that AA number.
® 7.3 [5-3-1] Voice Message—DISA
System—Option 1—
when all DISA ports are busy
Not assignable (Intercept Routing is not available.)
DISA Intercept—Intercept
Feature Guide 31