Panasonic KX-NCP500 Features Manual page 213

–
Displayed CLIP: The CLIP set for the line that Cellular Phone-1 used to transfer the call.
Outside Caller
•
DISA Reorder Tone Duration
It is possible to set the DISA Reorder Tone Duration time. This specifies the length of time that a reorder
tone will be sent to the caller. When the timer expires, the call will be disconnected. Call Retry is possible
during the DISA Reorder Tone Duration time.
→
4.5 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—
•
Call Deny
Extensions can deny DISA calls on a COS basis.
→
4.12 [2-7-1] Class of Service—COS Settings—Optional Device & Other Extensions—
Call from DISA
•
Verification Code PIN Lock/Extension PIN Lock
If the wrong PIN is entered three times, the line will be disconnected. If the wrong PIN is entered a
preprogrammed number of times successively, that extension or verification code will become locked, and
even entering the correct PIN will not unlock it. Only an extension assigned as the manager can unlock it.
In this case, the PIN will be unlocked and cleared.
→
4.5 [2-3] Timers & Counters—Miscellaneous—
•
DISA Automatic Walking COS
The KX-NCS3910, KX-NCS4910 or KX-NCS4950 (Activation Key for Software Upgrade to Enhanced
Version) is required to use this feature.
•
Each outgoing message (OGM) can be assigned a name through system programming for programming
reference.
→
7.4 [5-3-2] Voice Message—DISA Message—
→
[731] Outgoing Message (OGM) Name
Installation Manual References
KX-NCP500/KX-NCP1000
3.7.1 OPB3 Card (KX-NCP1190)
3.7.6 MSG4 Card (KX-TDA0191)
Trunk Telephone Company
Trunk
PBX
a.
Extn. 101
1.17.6 Direct Inward System Access (DISA)
Trunk
Trunk
Telephone
c. Company
Trunk
b.
Forward to
Cellular Phone-1
Extension PIN—Lock Counter
Name
Cellular Phone-2
Transfer to
Cellular Phone-2
Trunk
Cellular Phone-1
DISA—Reorder Tone Duration
Accept the
Feature Guide 213