Pairing - Outdoor Tech CHIPS 2.0 User Manual

PAIRING

To pair the CHIPS
enabled device:
Prior to using the OT CHIPS
you will have to pair them with a Bluetooth-enabled
device. The pairing procedure may vary for different
devices. Please refer to your device's user manual for
further information. The general pairing procedure is
as follows:
1.) Place the CHIPS
device no more than 3 feet apart.
2.) Hold the right ear button down until the LED
flashes red and blue alternately. The voice
prompt will state "Pairing"
3.) Activate your device's Bluetooth function and
set your device search for Bluetooth devices
within range. Select "ODT CHIPS
the list of devices shown.
4.) According to the indication, enter password or
Use pairing code: 0000.
5.) If prompted by your device to connect, select
"Yes" (this will vary among devices)
6.) After successfully connecting, the blue LED will
flash twice or three times every 4 seconds. The
voice prompt will state "Connected."
If your Bluetooth device disconnects from the
CHIPS 2.0 the voice prompt will state "Your
TM
headset is disconnected."
with a Bluetooth-
2.0
TM
2.0 for the first time,
TM
2.0 and Bluetooth-enabled
TM
2.0" from
TM